Ignition System Struggles

alantf · 08-03-2020, 03:10 AM

Have you checked the fuses?

Josh · 08-03-2020, 10:45 AM

Yeah, all the fuses are good and the battery is holding around 12 [V] . I was reading around a bit and saw some people mention the starter button / emergency stop switch commonly get corroded so I took some dusting spray to the housing and managed to get it to crank once or twice.

So, I'm planning to take some CRC to it sometime this week and check up on the other kill switches in line and hopefully get it resolved, the small crank I did get sounded quite odd though, the relay definitely actuated but it quickly sputtered out.

alantf · 08-04-2020, 03:18 AM

Did you check if there's voltage to the inlet side of the relay?

08-03-2020, 03:10 AM	#1
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,715	Have you checked the fuses? __________________ By birth an Englishman, by the grace of God a Yorkshireman. Login or Register to Remove Ads
	0

08-04-2020, 03:18 AM	#3
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,715	Did you check if there's voltage to the inlet side of the relay? __________________ By birth an Englishman, by the grace of God a Yorkshireman. Login or Register to Remove Ads
	0

08-03-2020, 10:45 AM	#2
Josh Junior Member Join Date: Aug 2020 Posts: 5	Yeah, all the fuses are good and the battery is holding around 12 [V] . I was reading around a bit and saw some people mention the starter button / emergency stop switch commonly get corroded so I took some dusting spray to the housing and managed to get it to crank once or twice. So, I'm planning to take some CRC to it sometime this week and check up on the other kill switches in line and hopefully get it resolved, the small crank I did get sounded quite odd though, the relay definitely actuated but it quickly sputtered out.
	0