A 2006 GZ250 Story

Water Warrior 2 · 09-16-2018, 01:02 AM

Quote:

Originally Posted by bachelorb

Yeah...... the shop manual said two inches above the peg. Mine was at 5 inches !!! Quick fix, and a whole lot better!!!

You also may have to adjust the rear brake light switch.

alantf · 09-16-2018, 02:52 AM

........... and the brake rod. I had to also move the activating arm on the spindle.

bachelorb · 09-17-2018, 10:31 AM

Quote:

You also may have to adjust the rear brake light switch.

09-15-2018 08:37 AM

Quote:

........... and the brake rod. I had to also move the activating arm on the spindle.

Thanks guys!!! I got er done.... Its kind of funny, the brake light switch setup hasn't changed since the 1970's..... I guess if it works........

Now I'm waiting on that flasher relay.... it should be here today.... Then I can either be relieved or start the whole process of going through the schematics again.......

09-16-2018, 02:52 AM	#2
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,715	........... and the brake rod. I had to also move the activating arm on the spindle. __________________ By birth an Englishman, by the grace of God a Yorkshireman.
	1