Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > Troubleshooting

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-12-2019, 08:07 PM   #4
wacio
Senior Member
 
Join Date: Apr 2016
Location: Illinois
Posts: 174
If you have low compression due to head gasket - there is no fixing by applying gasket maker. You'll have to fix it right. Buy gasket kit and replace head gasket at very minimum.
BTW - check oil level and state. If you have way too much oil and especially gas in oil - you will have good chance of blowing head gasket or cylinder gasket - due to high pressure in the crank case. If your oil smells like gas - it means petcock, carb needle valve problem (both) - needing urgent fix. Remember - gas is no lubricant - 3 quarts of gas in oil is not good for the engine...

Last edited by wacio; 10-12-2019 at 08:10 PM.
wacio is offline  
Reply With Quote
 



Tags
compression, electrical


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:13 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.