Oil and ZDDP levels

edison · 09-22-2012, 04:31 PM

Does the GZ have a cam and flat rocker type tappet system as found on the S40 / Savage? Does the motor oil need to have at least 1200 ppm of zinc to avoid excessive wear? (apparently zinc levels were dropped in most oils b/c of negative effects to catalytic converters) :hide:

Water Warrior 2 · 09-22-2012, 07:27 PM

The GZ has a rocker arm set-up so it is easy to do a valve adjust. No shims and disassembly required. The GZ has a 4 valve head where as the S-40 is a 2 valve head if my memory cells are all firing. Don't worry about the chemical formulation of oil. Any oil that is recommended for a motorcycle should meet all requirements without messing up a catalytic converter. The GZ does not have a CAT so you are home free.

09-22-2012, 04:31 PM	#1
edison Junior Member Join Date: May 2012 Location: Virginia, USA Posts: 15	Oil and ZDDP levels Does the GZ have a cam and flat rocker type tappet system as found on the S40 / Savage? Does the motor oil need to have at least 1200 ppm of zinc to avoid excessive wear? (apparently zinc levels were dropped in most oils b/c of negative effects to catalytic converters) :hide: Login or Register to Remove Ads
	0

09-22-2012, 07:27 PM	#2
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Oil and ZDDP levels The GZ has a rocker arm set-up so it is easy to do a valve adjust. No shims and disassembly required. The GZ has a 4 valve head where as the S-40 is a 2 valve head if my memory cells are all firing. Don't worry about the chemical formulation of oil. Any oil that is recommended for a motorcycle should meet all requirements without messing up a catalytic converter. The GZ does not have a CAT so you are home free.
	0