Go Back   GZ 250 Forums > GZ250-Specific > General GZ250 Talk
Reply
 
Thread Tools Display Modes
Old 11-15-2017, 01:36 PM   #1
anruari
Junior Member
 
Join Date: Jun 2013
Location: ireland
Posts: 20
whats needed to switch to led turn signals

okay i wanna swap out those big old ugly indicators for some smaller tidier led ones..

is there anything else i need to change in order to do this apart from the indicators themselves?

thanks..



Login or Register to Remove Ads
anruari is offline  
Reply With Quote
Old 11-15-2017, 04:00 PM   #2
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,306
That should be fairly straight forward. You will need an "electronic flasher." Check the bike's flasher and see if it is a 2 or 3 prong unit. Your local auto parts store will have one just waiting for you.
Water Warrior 2 is offline  
Reply With Quote
Old 11-15-2017, 05:01 PM   #3
blaine
Senior Member
 
blaine's Avatar
 
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,745
Quote:
Originally Posted by Water Warrior 2 View Post
That should be fairly straight forward. You will need an "electronic flasher." Check the bike's flasher and see if it is a 2 or 3 prong unit. Your local auto parts store will have one just waiting for you.
If I remember correctly the flasher unit & side stand relay are togerher in the same unit......Just disconnect the two flasher wires & hook to electronic flasher.....(Down on fuse box)
__________________
If at first you do succeed, try not to look surprised.


blaine is offline  
Reply With Quote
Old 11-16-2017, 05:20 AM   #4
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,306
Quote:
Originally Posted by blaine View Post
If I remember correctly the flasher unit & side stand relay are togerher in the same unit......Just disconnect the two flasher wires & hook to electronic flasher.....(Down on fuse box)

Thanks Blaine.
Water Warrior 2 is offline  
Reply With Quote
Old 11-25-2017, 10:08 PM   #5
anruari
Junior Member
 
Join Date: Jun 2013
Location: ireland
Posts: 20
Quote:
Originally Posted by Water Warrior 2 View Post
That should be fairly straight forward. You will need an "electronic flasher." Check the bike's flasher and see if it is a 2 or 3 prong unit. Your local auto parts store will have one just waiting for you.
okay erm where in the bike would i locate the flasher and then what do i do to hook and electronic one up?

think noob..
anruari is offline  
Reply With Quote
Old 11-25-2017, 11:14 PM   #6
blaine
Senior Member
 
blaine's Avatar
 
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,745
Quote:
Originally Posted by anruari View Post
okay erm where in the bike would i locate the flasher and then what do i do to hook and electronic one up?

think noob..
I replied above......Its down on the fuse box & you need to determine which two wires run the flasher & remove them from the box & hook to a electronic flasher.
__________________
If at first you do succeed, try not to look surprised.


blaine is offline  
Reply With Quote
Old 11-27-2017, 09:44 AM   #7
anruari
Junior Member
 
Join Date: Jun 2013
Location: ireland
Posts: 20
Quote:
Originally Posted by blaine View Post
I replied above......Its down on the fuse box & you need to determine which two wires run the flasher & remove them from the box & hook to a electronic flasher.
okay so the two wires that come from the flashers. and i assume to change the brake light to led you d need to add that wire also to the electronic flasher?
anruari is offline  
Reply With Quote
Old 11-27-2017, 04:26 PM   #8
blaine
Senior Member
 
blaine's Avatar
 
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,745
Quote:
Originally Posted by anruari View Post
okay so the two wires that come from the flashers. and i assume to change the brake light to led you d need to add that wire also to the electronic flasher?
Nope fore brake light/tail light just change to a LED bulb..(1157)
__________________
If at first you do succeed, try not to look surprised.


blaine is offline  
Reply With Quote
Reply


Please help support GZ250.com without it costing you one cent. Click here for more info.


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Please help support GZ250.com without it costing you one cent. Click here for more info.



All times are GMT -4. The time now is 05:27 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.