2007 GZ250 Part Out

MrBosket · 07-05-2011, 05:33 PM

(Make inquiries to: fanaticalknack@yahoo.com )

(MORE PICTURES BELOW)

It's that time of the year, and I unfortunately have to part out my GZ250

Never in an accident, and let down twice (not in motion). Expected cosmetic scratches here and there. The only remaining issue is that she has a micro fracturing in her cylinder head, and that's when I drew the line. That was the last part I needed to replace in order for my bike to stretch its legs again -- it's sad that she had to go out this way... ;(

Enough beating around the bush, lets talk parts!
(EVERYTHING EXCEPT CYLINDER HEAD, EXHAUST, AND FRONT FENDER IS IN GOOD WORKING CONDITION AND FOR SALE)

I'm basically saying, hey guys, nice bike, need parts?

Front Brake Master cylinder
Front Forks
Front Brake disc
Starter Relay
Frame
And that's just the tip of the iceberg!!!

If you have anything you need to replace, I might have it.

****EVERYTHING IS NEGOTIABLE, AND IN MOST CASES, 20%-50% OFF OF Cheapcycleparts.com LISTINGS****

HERE ARE THE PHOTOS!! (Specific photos available upon request)

ENTIRE ENGINE IS IN AWESOME CONDITION AND FOR SALE (except the cylinder head of course :tongue: )

Crankcase (right side pictured here)

(NEW) Piston

Cylinder (bored to fit new piston)

(NEW) Valve Rocker Arm Intake Shaft [12861-38200]

Crankshaft and left side crankcase

(NEW) 2 valve springs [12921-38211], (NEW) Valve Rocker Arm Ex [12850-13F00]

(NEW) Cam shaft [12711-13F00]

(NEW) Clutch Cover Gasket [11482-38312]

(NEW) Cylinder Head Gasket [11141-25D11]

(NEW) Cam chain tensioner [12811-38200]

(NEW) Magneto Cover Gasket [11483-37D00]

(NEW) Clutch Drive Plate [21442-37401] & (NEW) EBC Clutch plate set

(NEW) Cam Shaft Drive Chain [12760-13F00]

Beautiful Transmission

AND ALOT MORE PARTS!!!!

Rear tire is pretty new, less than 2000 miles on it.

Every oil change, and repair has been recorded in detail in log.

What ever you need, let me know!!!

Make all inquiries on here or to my email, which I check once or twice daily:

fanaticalknack@yahoo.com

-Thanks guys!

grego · 07-06-2011, 05:02 PM

i am looking for front reflectors

grego

MrBosket · 07-06-2011, 05:15 PM

Quote:

Originally Posted by grego

i am looking for front reflectors

grego

$5 for both.
Do you need the front bracket and nuts?

grego · 07-06-2011, 08:19 PM

i;ll take them...sent you a pm with info let me know if you didn't get it....am not sure i did it correctly

thanks

safe biking

grego

grego · 07-10-2011, 10:57 AM

anybody heard from mr.bosket lately ?

MrBosket · 07-10-2011, 01:57 PM

Quote:

Originally Posted by grego

anybody heard from mr.bosket lately ?

Hey Grego sorry for the delay, get back to you shortly!

Suncross · 07-10-2011, 04:48 PM

How much for the chain and...

This part in the picture. As you can see, mine is pretty scuffed up. I am not sure what that is. A cap of some sort, but the previous owner really didn't take care of this bike that well. I think chrome polish will help me with other parts of the engine, but no that.

MrBosket · 07-11-2011, 05:30 PM

Quote:

Originally Posted by Suncross

How much for the chain and...

This part in the picture. As you can see, mine is pretty scuffed up. I am not sure what that is. A cap of some sort, but the previous owner really didn't take care of this bike that well. I think chrome polish will help me with other parts of the engine, but no that.

Hi Suncross, I'm pretty sure you're circling the Starting Motor. You can't buy this system separately --well, at least you shouldn't (I wouldn't recommend it). Perhaps its time to service your bike, and I would look at your starter. If it needs to be replaced, I have one for sale.

I'll sell you the starter for $350.

Suncross · 07-11-2011, 06:37 PM

Quote:

Originally Posted by MrBosket

Quote:

Originally Posted by Suncross

How much for the chain and...

This part in the picture. As you can see, mine is pretty scuffed up. I am not sure what that is. A cap of some sort, but the previous owner really didn't take care of this bike that well. I think chrome polish will help me with other parts of the engine, but no that.

Hi Suncross, I'm pretty sure you're circling the Starting Motor. You can't buy this system separately --well, at least you shouldn't (I wouldn't recommend it). Perhaps its time to service your bike, and I would look at your starter. If it needs to be replaced, I have one for sale.

I'll sell you the starter for $350.

So you won't sell the cosmetic parts?

blaine · 07-11-2011, 08:18 PM

$350 for a used starter? :shocked: O_o :??: :??:

07-05-2011, 05:33 PM	#1
MrBosket Junior Member Join Date: Jul 2011 Location: Marysville Posts: 9	2007 GZ250 Part Out (Make inquiries to: fanaticalknack@yahoo.com ) (MORE PICTURES BELOW) It's that time of the year, and I unfortunately have to part out my GZ250 Never in an accident, and let down twice (not in motion). Expected cosmetic scratches here and there. The only remaining issue is that she has a micro fracturing in her cylinder head, and that's when I drew the line. That was the last part I needed to replace in order for my bike to stretch its legs again -- it's sad that she had to go out this way... ;( Enough beating around the bush, lets talk parts! (EVERYTHING EXCEPT CYLINDER HEAD, EXHAUST, AND FRONT FENDER IS IN GOOD WORKING CONDITION AND FOR SALE) I'm basically saying, hey guys, nice bike, need parts? Front Brake Master cylinder Front Forks Front Brake disc Starter Relay Frame And that's just the tip of the iceberg!!! If you have anything you need to replace, I might have it. **EVERYTHING IS NEGOTIABLE, AND IN MOST CASES, 20%-50% OFF OF Cheapcycleparts.com LISTINGS** HERE ARE THE PHOTOS!! (Specific photos available upon request) ENTIRE ENGINE IS IN AWESOME CONDITION AND FOR SALE (except the cylinder head of course :tongue: ) Crankcase (right side pictured here) (NEW) Piston Cylinder (bored to fit new piston) (NEW) Valve Rocker Arm Intake Shaft [12861-38200] Crankshaft and left side crankcase (NEW) 2 valve springs [12921-38211], (NEW) Valve Rocker Arm Ex [12850-13F00] (NEW) Cam shaft [12711-13F00] (NEW) Clutch Cover Gasket [11482-38312] (NEW) Cylinder Head Gasket [11141-25D11] (NEW) Cam chain tensioner [12811-38200] (NEW) Magneto Cover Gasket [11483-37D00] (NEW) Clutch Drive Plate [21442-37401] & (NEW) EBC Clutch plate set (NEW) Cam Shaft Drive Chain [12760-13F00] Beautiful Transmission AND ALOT MORE PARTS!!!! Rear tire is pretty new, less than 2000 miles on it. Every oil change, and repair has been recorded in detail in log. What ever you need, let me know!!! Make all inquiries on here or to my email, which I check once or twice daily: fanaticalknack@yahoo.com -Thanks guys! Login or Register to Remove Ads
	0

07-06-2011, 05:02 PM	#2
grego Member Join Date: Apr 2011 Location: anaheim california Posts: 96	Re: 2007 GZ250 Part Out --ENGINE PARTS!!! 20%-50% Off Everyt i am looking for front reflectors grego
	0

07-06-2011, 08:19 PM	#4
grego Member Join Date: Apr 2011 Location: anaheim california Posts: 96	Re: 2007 GZ250 Part Out --ENGINE PARTS!!! 20%-50% Off Everyt i;ll take them...sent you a pm with info let me know if you didn't get it....am not sure i did it correctly thanks safe biking grego
	0

07-10-2011, 10:57 AM	#5
grego Member Join Date: Apr 2011 Location: anaheim california Posts: 96	Re: 2007 GZ250 Part Out -- HURRY IN, PARTS ARE SELLING QUICK anybody heard from mr.bosket lately ? Login or Register to Remove Ads
	0

07-10-2011, 04:48 PM	#7
Suncross Member Join Date: Jul 2011 Location: Florida Posts: 33	Re: 2007 GZ250 Part Out -- HURRY IN, PARTS ARE SELLING QUICK How much for the chain and... This part in the picture. As you can see, mine is pretty scuffed up. I am not sure what that is. A cap of some sort, but the previous owner really didn't take care of this bike that well. I think chrome polish will help me with other parts of the engine, but no that.
	0

07-11-2011, 08:18 PM	#10
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	Re: 2007 GZ250 Part Out -- HURRY IN, PARTS ARE SELLING QUICK $350 for a used starter? :shocked: O_o :??: :??: __________________ If at first you do succeed, try not to look surprised.
	0