1" handle bars - Page 2

emory70 · 08-20-2010, 10:40 PM

not to sound like a critic, but i have seen in many ways that when someone uses something "because i have it," it is almost ALWAYS a bad idea. get what you want or need cause you want or need it. don't use what you have just cause you have it.

mrlmd1 · 08-21-2010, 09:00 AM

Quote:

Originally Posted by Palaka

I went to a bike shop to order the bars and we measured it out and checked the cables and will have plenty of cable to do it. .

Did you measure the cables with the bars turned as far right and left and they can go? That takes up some slack in the cables, that's why they are loose or longer than they look like they have to be at rest with the bars midline straight ahead.

Palaka · 08-21-2010, 11:13 AM

Quote:

Originally Posted by mrlmd1

Did you measure the cables with the bars turned as far right and left and they can go?

Yes Sir we checked with the bars at both extremes everything looked good and when I finally get it in and mounted I will find out than if there is any other issues. I appriciate everyones input and please if any of you can think of something else that I might have missed please let me know.

08-20-2010, 10:40 PM	#11
emory70 Senior Member Join Date: Jul 2010 Location: jacksonville fl Posts: 100	Re: 1" handle bars not to sound like a critic, but i have seen in many ways that when someone uses something "because i have it," it is almost ALWAYS a bad idea. get what you want or need cause you want or need it. don't use what you have just cause you have it. __________________ STGMTT Login or Register to Remove Ads
	0