Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > General GZ250 Talk

Reply
 
Thread Tools Display Modes
Old 05-22-2007, 06:17 AM   #21
Badbob
Senior Member
 
Badbob's Avatar
 
Join Date: Aug 2006
Location: Tallahassee FL
Posts: 945
It doesn't have a backfire sensor. I've had ever electrical component on my bike out and identified every one of them. No backfire sensor.

There also is no revlimiter. I've had motorcycle mechanics tell me that it did.



Login or Register to Remove Ads
Badbob is offline  
Reply With Quote
Old 05-23-2007, 12:21 AM   #22
bigfour
Member
 
Join Date: Oct 2006
Location: CT, Norwalk
Posts: 51
I think it's because compression will sometimes push the cylinder in the opposite direction on the final rev, causing the startor motor/clutch to catch.
P. Henry desribes the sound's origin on the yahoo forums:

"I think what happens is sometimes when you shut off the GZ the
compression of the engine kicks it backwards slightly turning it in
the wrong direction. When this happens you hear a clunk and a whirr
as the starter motor catches and spins over slightly. It's nothing to
worry about! It's better for the engine and starter if it dies
quietly and doesn't kick bacwards. But mine will make this sound
about 50% of the time"
__________________
bigfour is offline  
Reply With Quote
Old 05-23-2007, 01:00 AM   #23
birdmove
Member
 
Join Date: May 2007
Location: Puyallup, Wa. USA
Posts: 58
That backfire on shutting off the engine is really common on the Suzuki S40/Savage too. I think its due to the lean carb.
jon
__________________
Birdmove
Puyallup, Wa. USA



Login or Register to Remove Ads
birdmove is offline  
Reply With Quote
Old 05-23-2007, 09:09 PM   #24
Dirt_McGert
Member
 
Join Date: May 2007
Posts: 68
Well that's good. Yeah I'd say it does it about 50% of the time too. I'll have time to work on it pretty soon here. I'll do the needle shim mod and richen her up, see what happens. I eventually wanna change out the stock exhaust too - it sounds kinda sally-ish (like a beefy moped.)

Changed the oil today too, for all I know it was probably factory oil that came out of it hahahah!!!
__________________
2003 Suzuki GZ250 - All stock (bought with 740 miles on it)
Dirt_McGert is offline  
Reply With Quote
Old 05-24-2007, 04:36 PM   #25
jonathan180iq
Super Moderator
 
jonathan180iq's Avatar
 
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
Quote:
Originally Posted by Dirt_McGert
It doesn't exactly "over run" (or "diesel") when the motor shuts off.... when I turn the key to off, the motor stops cranking like normal, then at the end lets out a whisp of air (possibly the exhaust valve opening and letting out the compressed air? - sounds like "pshhhh"), and then a half-second or less later, the muffler lets out a nice little pop.
It's not backfire. It's after-fire caused by running RICH

It's unburned fuel igniting in the exhaust.

It may also be time for a valve adjustment.


Take care,
Jonathan



Login or Register to Remove Ads
jonathan180iq is offline  
Reply With Quote
Old 05-25-2007, 12:02 AM   #26
Dirt_McGert
Member
 
Join Date: May 2007
Posts: 68
Actually guys, I think I fixed it. In automotive class today I turned the idle down (it was idling really high ever since I got it) to where it should be, and every time that I've shut it off since then (probably about 4 or 5 times) it hasn't backfired, or afterfired.

I'll keep you posted if it keeps doing it.

Someone mentioned a valve adjustment? I highly doubt the valves need to be readjusted since there's only 900 miles on the motor and bike. And I doubt the bike would be running rich, unless someone messed with the carb before they sold it to me. Not to be "rude" or anything against your knowledge, I'm just saying that that's probably not the issue at hand. Again I'll let you guys know if it keeps doing it now that the idle is set properly
__________________
2003 Suzuki GZ250 - All stock (bought with 740 miles on it)
Dirt_McGert is offline  
Reply With Quote
Old 05-25-2007, 08:09 AM   #27
jonathan180iq
Super Moderator
 
jonathan180iq's Avatar
 
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
I mentioned a valve adjustment because you said this:

"possibly the exhaust valve opening and letting out the compressed air"

David gives a better explanation below.
jonathan180iq is offline  
Reply With Quote
Old 05-25-2007, 10:25 AM   #28
davidc83
Senior Member
 
Join Date: Jan 2007
Posts: 184
Actually, the service manual states the first valve adjustment check should be done at 600 miles, then every at 3000, 5000, 9500 miles, etc.

The Suzuki gz250 could be running lean or rich from the factory. Depending on how much adjustment (one way or another) they need to do to meet EPA standards. Mine is running a little lean, but a friend of mine with a new S40 is/was rich from the factory.

If you do a search on this forum, you can find and download the service manual. The maintenance chart is on page 38.
davidc83 is offline  
Reply With Quote
Old 05-25-2007, 11:49 AM   #29
jonathan180iq
Super Moderator
 
jonathan180iq's Avatar
 
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
With all the use of the word backrife, I'd like to add that this term is commonly misused.

A backfire, on a motorcycle, is very startling because it's a very loud echo-ing BANG that comes back through the air box.

Afterfire is the scenario that you are describing.

"There are two types of backfire. One is an explosion in the engine's exhaust manifold or exhaust system, this is most correctly referred to as afterfire."
-Property of Wikipedia.com
jonathan180iq is offline  
Reply With Quote
Old 05-26-2007, 05:15 PM   #30
Dirt_McGert
Member
 
Join Date: May 2007
Posts: 68
Yep, then it was afterfiring through the exhaust pipe. Wasn't backfiring out of the carb or anything.

But, the problem IS fixed! The high-idle speed was the cause. Before I adjusted it, it would idle normally at the speed it does now with the choke on, maybe even higher!
__________________
2003 Suzuki GZ250 - All stock (bought with 740 miles on it)
Dirt_McGert is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:27 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.