Go Back   GZ 250 Forums > GZ250-Specific > General Maintenance

Reply
 
Thread Tools Display Modes
Old 07-10-2017, 08:46 PM   #1
Paul V.
Junior Member
 
Join Date: Jul 2017
Posts: 2
Seat. Latching it back down.

Have recently got this honey.

Am on my way to removing the tank. Finally got the key to work/remove seat
But when I want to replace the seat, either the back goes down properly(2 latch) or the front thingy goes into its slot. But never both.

Any advice much appreciated. Thanks in advance <VBS:>

-- Paul



Login or Register to Remove Ads
Paul V. is offline  
Reply With Quote
Old 12-26-2017, 09:57 PM   #2
schumi23
Junior Member
 
Join Date: May 2017
Posts: 1
Pretty late reply, but in my experience you need to first make sure that the front thingy goes in its slot, and then jigle around to get it to go all the way in. You also may need to turn the key once the read goes onto its lockhole. Try a few times and you'll get a hang of it... kinda...
schumi23 is offline  
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:21 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.