Where to get spare keys?

brizbot · 04-17-2019, 06:11 PM

Greetings!

After spending a week looking for the only key I had for my 2003 Suzuki GZ 250 (which turned out was underneath the seat, luckily I figured out how to remove the bolts on the latch below the gas tank), I realized I should probably make a spare or five.

Any suggestions on how and/or where to get this done?

Thanks for your time
Briz

Vegas Street Rider · 04-17-2019, 06:27 PM

I just went to a local locksmith and he made me a couple of spares. They are not too common but you should be able to snag some extras.

wacio · 04-17-2019, 09:41 PM

Ace Hardware - $4.50 each cut to your key. Just try after its made - not all of the copier operators are knowledgeable. My first one was fail. They made another one - works perfectly.

brizbot · 04-19-2019, 12:58 PM

Thank you! I took it to a local hardware store and the two copies they made work well for the gas tank and seat release, but not ignition... I will try another place...

04-17-2019, 06:11 PM	#1
brizbot Junior Member Join Date: Sep 2016 Posts: 10	Where to get spare keys? Greetings! After spending a week looking for the only key I had for my 2003 Suzuki GZ 250 (which turned out was underneath the seat, luckily I figured out how to remove the bolts on the latch below the gas tank), I realized I should probably make a spare or five. Any suggestions on how and/or where to get this done? Thanks for your time Briz Login or Register to Remove Ads
	0

04-17-2019, 09:41 PM	#3
wacio Senior Member Join Date: Apr 2016 Location: Illinois Posts: 174	Ace Hardware - $4.50 each cut to your key. Just try after its made - not all of the copier operators are knowledgeable. My first one was fail. They made another one - works perfectly. Login or Register to Remove Ads
	0

04-17-2019, 06:27 PM	#2
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,089	I just went to a local locksmith and he made me a couple of spares. They are not too common but you should be able to snag some extras.
	1

04-19-2019, 12:58 PM	#4
brizbot Junior Member Join Date: Sep 2016 Posts: 10	Thank you! I took it to a local hardware store and the two copies they made work well for the gas tank and seat release, but not ignition... I will try another place...
	0