No Spark!?? Replaced ALOT

spldart · 04-04-2017, 09:50 PM

You have replaced all this and say still no spark... Have you tried a timing light to verify?
Have you ruled out the other sides of this?
air/fuel, compression, spark, <-timed correctly.
Plug getting wet, smells like gas?
engine been compression tested?
Timing light flashes or not? If it does is it flashing at/near TDC as per service manual?
OH! That kill engine switch on the right handle bar has given me issues in the past. Crank but no
fire.
Check it!
You might try flicking it on and off several times. Then crank once. Then flick off and back on. then crank again. Then flick off and on, then crank again... You get the picture....
If that doesn't work hit the wiring diagram and verify that switch.

04-04-2017, 09:50 PM	#2
spldart Senior Member Join Date: May 2015 Location: Stafford, Texas Posts: 604	You have replaced all this and say still no spark... Have you tried a timing light to verify? Have you ruled out the other sides of this? air/fuel, compression, spark, <-timed correctly. Plug getting wet, smells like gas? engine been compression tested? Timing light flashes or not? If it does is it flashing at/near TDC as per service manual? OH! That kill engine switch on the right handle bar has given me issues in the past. Crank but no fire. Check it! You might try flicking it on and off several times. Then crank once. Then flick off and back on. then crank again. Then flick off and on, then crank again... You get the picture.... If that doesn't work hit the wiring diagram and verify that switch.
	0