Picked up a project 2001gz250

Bikeguy216 · 10-16-2013, 10:57 AM

I picked this bike up it was in a box. The guy I got It from had the engine on a go kart, I have all the wires hooked back and I don't get spark. I either need suggestions on things to check to get spark or how eliminate the wiring to basic to for a bobber

**jonathan180iq** · 10-16-2013, 11:09 AM

We're going to need some more information to help you out. All I understand is that you bought a rolling chassis. The GZ motor at one point was on a Go-Kart, as was the wiring harness, and now you're not getting spark?

Was there spark when it was hooked up to the go-kart? Are you sure you didn't just get hosed?

Bikeguy216 · 10-16-2013, 12:37 PM

I got it from a friend that got it from his step brother that had it running on a go cart frame. The original wiring harness was all chopped up. I have a fresh harness now. But he did have a coil out of the stator cover. I put that back in the best I could from looking at pics online

alantf · 10-16-2013, 01:53 PM

Have you tested the battery?

**jonathan180iq** · 10-16-2013, 01:56 PM

Have you tested the voltage into and out of the rectifier/regulator? Are you getting not juice at all to the plug?
Do you have a timing light?

Bikeguy216 · 10-16-2013, 03:24 PM

Brand new battery. All the right voltage . I think I Have a timing light

Bikeguy216 · 10-16-2013, 03:30 PM

I tested the coil and it's getting the right amount of ohms just not putting out spark

10-16-2013, 10:57 AM	#1
Bikeguy216 Junior Member Join Date: Oct 2013 Location: Cleveland,oh Posts: 4	Picked up a project 2001gz250 I picked this bike up it was in a box. The guy I got It from had the engine on a go kart, I have all the wires hooked back and I don't get spark. I either need suggestions on things to check to get spark or how eliminate the wiring to basic to for a bobber Login or Register to Remove Ads
	0

10-16-2013, 11:09 AM	#2
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Re: Picked up a project 2001gz250 We're going to need some more information to help you out. All I understand is that you bought a rolling chassis. The GZ motor at one point was on a Go-Kart, as was the wiring harness, and now you're not getting spark? Was there spark when it was hooked up to the go-kart? Are you sure you didn't just get hosed?
	0

10-16-2013, 12:37 PM	#3
Bikeguy216 Junior Member Join Date: Oct 2013 Location: Cleveland,oh Posts: 4	Re: Picked up a project 2001gz250 I got it from a friend that got it from his step brother that had it running on a go cart frame. The original wiring harness was all chopped up. I have a fresh harness now. But he did have a coil out of the stator cover. I put that back in the best I could from looking at pics online Login or Register to Remove Ads
	0

10-16-2013, 01:53 PM	#4
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,715	Re: Picked up a project 2001gz250 Have you tested the battery? __________________ By birth an Englishman, by the grace of God a Yorkshireman.
	0

10-16-2013, 01:56 PM	#5
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Re: Picked up a project 2001gz250 Have you tested the voltage into and out of the rectifier/regulator? Are you getting not juice at all to the plug? Do you have a timing light? Login or Register to Remove Ads
	0

10-16-2013, 03:24 PM	#6
Bikeguy216 Junior Member Join Date: Oct 2013 Location: Cleveland,oh Posts: 4	Re: Picked up a project 2001gz250 Brand new battery. All the right voltage . I think I Have a timing light
	0

10-16-2013, 03:30 PM	#7
Bikeguy216 Junior Member Join Date: Oct 2013 Location: Cleveland,oh Posts: 4	Re: Picked up a project 2001gz250 I tested the coil and it's getting the right amount of ohms just not putting out spark
	0