how to, hook up your turn signal lights again...

grimjaw · 04-13-2010, 06:51 PM

...because you forgot to remember which wires went where.

Now this is complicated by the fact that I had to buy a second hand set of turn signals because my original left front turn light was cracked in a wreck. Now I have the new set, and everything works. Except, when I turn the bike on, the left signal light comes on and stays on. Rear blinkers work as they're supposed to, and front right blinker works OK.

Colors on wires coming from left turn signal, BLACK/WHITE, BLACK, GRAY. Left over wires in the headlight housing, BROWN, GREEN, BLACK/WHITE.

Does anyone know how this is supposed to mate up? Other than some general maintenance, this is the last of my repairs.

jm

04-13-2010, 06:51 PM	#1
grimjaw Junior Member Join Date: Nov 2009 Location: central Arkansas Posts: 10	how to, hook up your turn signal lights again... ...because you forgot to remember which wires went where. Now this is complicated by the fact that I had to buy a second hand set of turn signals because my original left front turn light was cracked in a wreck. Now I have the new set, and everything works. Except, when I turn the bike on, the left signal light comes on and stays on. Rear blinkers work as they're supposed to, and front right blinker works OK. Colors on wires coming from left turn signal, BLACK/WHITE, BLACK, GRAY. Left over wires in the headlight housing, BROWN, GREEN, BLACK/WHITE. Does anyone know how this is supposed to mate up? Other than some general maintenance, this is the last of my repairs. jm Login or Register to Remove Ads
	0