Ignition problem

Ksahibdeen · 11-12-2020, 05:13 PM

Changed my ignition today and the black and white wire burned up. Dont know what to do now

Vegas Street Rider · 11-12-2020, 11:51 PM

Is this an OEM replacement or one of the Chinese knock-offs that you replaced it with? My guess is you wired it where it went direct to ground overloading the system. I am surprised a fuse didn't blow to protect the system. Check your wire diagram to make sure you hooked it up right. If that checks out, you may have a bad ignition module or the color codes are different from an OEM unit.

You will need to replace the fried wires, of course, and start over. Sorry you are having such a hassle.

Vegas Street Rider · 12-08-2020, 01:16 PM

Curious as to what you found out regarding your ignition system problem. Make any progress?

11-12-2020, 05:13 PM	#1
Ksahibdeen Junior Member Join Date: Nov 2020 Posts: 1	Ignition problem Changed my ignition today and the black and white wire burned up. Dont know what to do now Login or Register to Remove Ads
	0

12-08-2020, 01:16 PM	#3
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,089	Curious as to what you found out regarding your ignition system problem. Make any progress? Login or Register to Remove Ads
	0

11-12-2020, 11:51 PM	#2
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,089	Is this an OEM replacement or one of the Chinese knock-offs that you replaced it with? My guess is you wired it where it went direct to ground overloading the system. I am surprised a fuse didn't blow to protect the system. Check your wire diagram to make sure you hooked it up right. If that checks out, you may have a bad ignition module or the color codes are different from an OEM unit. You will need to replace the fried wires, of course, and start over. Sorry you are having such a hassle.
	0