Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > Troubleshooting

Reply
 
Thread Tools Display Modes
Old 05-14-2019, 08:54 PM   #1
wacio
Senior Member
 
Join Date: Apr 2016
Location: Illinois
Posts: 174
My advice is to buy rebuild kit. The seal under the valve handle is getting hard and the valve starts leaking. It first leaks thru - meaning that the gas will continue sipping into the carb continuously. This will be causing gunk buildup in the jets. So even if the valve doesn't appear to leak externally - I'd replace if older than 10 years. I bought few of those cheap petcocks you can get on eBay - the problem is that most don't fit - collide with seam on the tank or end up needing to operate handle backwards. Most of them are on, off, reserve - not vacuum operated - so you need to remember to turn off.



Login or Register to Remove Ads
wacio is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:06 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.