Saddle bag supports for GZ250 - where to get them?

ArizonaKev · 06-28-2010, 01:40 PM

Hi All,

I have some saddlebags that came with my bike and I like them a lot, so I am not looking for new ones. After reading some comments and other posts though, I am thinking it would be a very good idea to get some supports/brackets for them to keep them out of the rear wheel, and get the right hand side one a little further from the exhaust pipe.

Thing is, I can't seem to find any online for the GZ250. I haven't yet tried the dealer, although I am sure they have them - for a pretty penny. Anyone here have any tips/advice/referrals for such things? I suppose I could make some myself - at least something to accomplish the basic purpose. I am just wondering if there are any out there pre-made and ready to bolt on. As always, thanks to all :2tup:

AZ Kev

ArizonaKev · 06-28-2010, 01:56 PM

Ok - I guess I should have looked a little harder first - d'oh! I found them on the Suzuki site, and they are only $56. I think I can handle that. May as well get them new, and get the Suzuki ones for a sure fit. Unless there is something I don't know about them......?

AZ Kev

bonehead · 06-28-2010, 03:13 PM

Quote:

Originally Posted by ArizonaKev

Ok - I guess I should have looked a little harder first - d'oh! I found them on the Suzuki site, and they are only $56. I think I can handle that. May as well get them new, and get the Suzuki ones for a sure fit. Unless there is something I don't know about them......?

AZ Kev

Over priced!!!!!
Search for home made ones on here. I remember a post and the guy did a real good job on them.

Water Warrior 2 · 06-28-2010, 03:22 PM

:2tup: For sure ! Check a couple years back. There was a real simple slick DIY that was superb. The supports used the already existing threaded holes in the bottom side of the chrome rails of the rear fender. A great penny tech solution.

ncff07 · 06-28-2010, 03:37 PM

Think he's got a few things for the GZ to sell if he gets time away from work to do it.

http://www.gz250bike.com/forum/viewt...hp?f=11&t=3149

ArizonaKev · 06-28-2010, 04:10 PM

Right on guys - I will search again for the DIY solution, but if you happen to come across it yourself, or remember where it might be, please let me know. I haven't been able to find it yet.

Oh, and I did check that link nff, sent the guy an email to see if he still has them. I am just wondering how much shipping would run though. Might end up costing me more than buying them new! Lol! Thanks all :2tup:

AZ Kev

Water Warrior 2 · 06-28-2010, 10:42 PM

Guess what I just found ???? DIY brackets. Go to Introduce Yourself. Jan 10/2009. jberejik came on board and brought his solution for bag supports on the cheap. Read and reap the rewards.

ArizonaKev · 06-29-2010, 12:53 PM

Right on, thanks WW. I checked those out, and they look pretty cool - definitely on the cheap too! Seems like they would be very easy to make and serve the purpose well. I think I will see what I can whip up this weekend.

Appreciate it :2tup:

AZ Kev

Water Warrior 2 · 06-29-2010, 09:05 PM

That's why we are here. There is strength in numbers. Combined knowledge and imagination is a wonderful combo.

06-28-2010, 01:40 PM	#1
ArizonaKev Senior Member Join Date: May 2010 Location: Phoenix, AZ Posts: 180	Saddle bag supports for GZ250 - where to get them? Hi All, I have some saddlebags that came with my bike and I like them a lot, so I am not looking for new ones. After reading some comments and other posts though, I am thinking it would be a very good idea to get some supports/brackets for them to keep them out of the rear wheel, and get the right hand side one a little further from the exhaust pipe. Thing is, I can't seem to find any online for the GZ250. I haven't yet tried the dealer, although I am sure they have them - for a pretty penny. Anyone here have any tips/advice/referrals for such things? I suppose I could make some myself - at least something to accomplish the basic purpose. I am just wondering if there are any out there pre-made and ready to bolt on. As always, thanks to all :2tup: AZ Kev __________________ ATGATT - Road rash sucks, and the asphalt doesn't care how "cool" you look... Login or Register to Remove Ads
	0

06-28-2010, 01:56 PM	#2
ArizonaKev Senior Member Join Date: May 2010 Location: Phoenix, AZ Posts: 180	Re: Saddle bag supports for GZ250 - where to get them? Ok - I guess I should have looked a little harder first - d'oh! I found them on the Suzuki site, and they are only $56. I think I can handle that. May as well get them new, and get the Suzuki ones for a sure fit. Unless there is something I don't know about them......? AZ Kev __________________ ATGATT - Road rash sucks, and the asphalt doesn't care how "cool" you look...
	0

06-28-2010, 03:22 PM	#4
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Saddle bag supports for GZ250 - where to get them? :2tup: For sure ! Check a couple years back. There was a real simple slick DIY that was superb. The supports used the already existing threaded holes in the bottom side of the chrome rails of the rear fender. A great penny tech solution.
	0

06-28-2010, 03:37 PM	#5
ncff07 Senior Member Join Date: May 2010 Posts: 182	Re: Saddle bag supports for GZ250 - where to get them? Think he's got a few things for the GZ to sell if he gets time away from work to do it. http://www.gz250bike.com/forum/viewt...hp?f=11&t=3149 Login or Register to Remove Ads
	0

06-28-2010, 04:10 PM	#6
ArizonaKev Senior Member Join Date: May 2010 Location: Phoenix, AZ Posts: 180	Re: Saddle bag supports for GZ250 - where to get them? Right on guys - I will search again for the DIY solution, but if you happen to come across it yourself, or remember where it might be, please let me know. I haven't been able to find it yet. Oh, and I did check that link nff, sent the guy an email to see if he still has them. I am just wondering how much shipping would run though. Might end up costing me more than buying them new! Lol! Thanks all :2tup: AZ Kev __________________ ATGATT - Road rash sucks, and the asphalt doesn't care how "cool" you look...
	0

06-28-2010, 10:42 PM	#7
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Saddle bag supports for GZ250 - where to get them? Guess what I just found ???? DIY brackets. Go to Introduce Yourself. Jan 10/2009. jberejik came on board and brought his solution for bag supports on the cheap. Read and reap the rewards.
	0

06-29-2010, 12:53 PM	#8
ArizonaKev Senior Member Join Date: May 2010 Location: Phoenix, AZ Posts: 180	Re: Saddle bag supports for GZ250 - where to get them? Right on, thanks WW. I checked those out, and they look pretty cool - definitely on the cheap too! Seems like they would be very easy to make and serve the purpose well. I think I will see what I can whip up this weekend. Appreciate it :2tup: AZ Kev __________________ ATGATT - Road rash sucks, and the asphalt doesn't care how "cool" you look...
	0

06-29-2010, 09:05 PM	#9
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Saddle bag supports for GZ250 - where to get them? That's why we are here. There is strength in numbers. Combined knowledge and imagination is a wonderful combo.
	0