Passenger Foot Peg Vibration

Tomcat13t · 05-27-2015, 08:54 PM

I'm looking for a way to get rid of the viberations in the passenger foot pegs. My girl says after 10 mins on the bike, she can't feel her feet cause the vibration is so bad. I looked at the front pegs and I noticed they have some rubber in between the mount and the peg and the peg has hollow rubber on the top. No such thing for the passanger.
Any suggestions?? Don't want to spend much, i.e. under $30. Thanks!!

**jonathan180iq** · 06-02-2015, 09:21 AM

I'm not too familiar with the footpeg setup, but you could fabricate something for her easy enough. Just find some rubber stock and cut her some shims.

That being said, they shouldn't be vibrating so much that her feet are going numb, even if they are completely worn out. I would check your engine mounting bolts for tightness and make sure other such bolts all over the bike are sufficiently snugged up.

05-27-2015, 08:54 PM	#1
Tomcat13t Member Join Date: May 2012 Location: North Riverside, IL Posts: 34	Passenger Foot Peg Vibration I'm looking for a way to get rid of the viberations in the passenger foot pegs. My girl says after 10 mins on the bike, she can't feel her feet cause the vibration is so bad. I looked at the front pegs and I noticed they have some rubber in between the mount and the peg and the peg has hollow rubber on the top. No such thing for the passanger. Any suggestions?? Don't want to spend much, i.e. under $30. Thanks!! Login or Register to Remove Ads
	0

06-02-2015, 09:21 AM	#2
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	I'm not too familiar with the footpeg setup, but you could fabricate something for her easy enough. Just find some rubber stock and cut her some shims. That being said, they shouldn't be vibrating so much that her feet are going numb, even if they are completely worn out. I would check your engine mounting bolts for tightness and make sure other such bolts all over the bike are sufficiently snugged up.
	0