Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > Troubleshooting

Reply
 
Thread Tools Display Modes
Old 09-20-2023, 07:08 PM   #1
mazoratti
Junior Member
 
mazoratti's Avatar
 
Join Date: Feb 2020
Posts: 6
When I turn the throttle the bike goes out...

I cleaned the carburetor...3 times...
any ideas?



Login or Register to Remove Ads
mazoratti is offline  
Reply With Quote
Old 09-23-2023, 05:36 PM   #2
Vegas Street Rider
Senior Member
 
Join Date: May 2015
Location: Henderson, NV
Posts: 1,089
Assuming your float is working properly in the carb, it could be that the diaphragm in the fuel petcock isn't responding to the call for more fuel. You might take the petcock apart and make sure there are no tears in the diaphragm.

Hard to diagnose some things over the net. good luck.

You might want to try starting it with the petcock set to prime. That will tell you if your petcock is starving the carb for fuel when you throttle up.

Last edited by Vegas Street Rider; 09-23-2023 at 05:39 PM.
Vegas Street Rider is offline  
Reply With Quote
Old 09-27-2023, 04:48 AM   #3
mazoratti
Junior Member
 
mazoratti's Avatar
 
Join Date: Feb 2020
Posts: 6
the manual says the airflow should be 1 1/2...I think it's should 3 - 3 1/2? how many do you turn yours?



Login or Register to Remove Ads
mazoratti is offline  
Reply With Quote
Old 09-28-2023, 05:14 PM   #4
Vegas Street Rider
Senior Member
 
Join Date: May 2015
Location: Henderson, NV
Posts: 1,089
Was your bike running lean to begin with? An indicator would be your exhaust pipes turning blue where they come out of the head. If that is the case, I would bottom out the screw and then turn it out 3 full turns. If not running lean, I believe the factory setting was about 2 and a half to 2 and 3/4 turns out.

Let me know how things turn out for you. By the way, what year bike is it?

My bike is a 2009 and I had to turn it out about half a turn to richen it up a bit.
Vegas Street Rider is offline  
Reply With Quote
Old 10-02-2023, 09:52 AM   #5
mazoratti
Junior Member
 
mazoratti's Avatar
 
Join Date: Feb 2020
Posts: 6
Quote:
Originally Posted by Vegas Street Rider View Post
Was your bike running lean to begin with? An indicator would be your exhaust pipes turning blue where they come out of the head. If that is the case, I would bottom out the screw and then turn it out 3 full turns. If not running lean, I believe the factory setting was about 2 and a half to 2 and 3/4 turns out.

Let me know how things turn out for you. By the way, what year bike is it?

My bike is a 2009 and I had to turn it out about half a turn to richen it up a bit.
Hello,
mine was set to 3,5 turns and I drove her for 3 years without any problems.
she's 2003



Login or Register to Remove Ads
mazoratti is offline  
Reply With Quote
Old 10-03-2023, 03:55 PM   #6
Vegas Street Rider
Senior Member
 
Join Date: May 2015
Location: Henderson, NV
Posts: 1,089
Did you also check out the fuel petcock and also check the vacuum hose going to the carb to make sure it hasn't collapsed.

Another thing to check is to make sure the choke is working properly. Does it die from idle if you engage your choke or rev up?

Running out of ideas to help you out. Hope you get it figured out. Let us know what you ended up doing to make it run properly.
Vegas Street Rider is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:59 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.