UPDATE - New K&N Filter, Emgo Muffler, and Carburator Mods

David Bo · 04-26-2009, 01:00 PM

OK, I'm finally finished... My new filter and muffler came in last week The air filter was very easy to replace. The muffler was a little bit difficult but only because I was fussy about positioning it. I ended up cutting the muffler's mounting bracket a bit to position the exhaust pipe as close to the bike as possible. I bought the extra long reverse cone muffler just like the one Blackbird put on Raven. It sounds SWEET! I also did all three carburator mods (idle screw adjustment, added washers to the needle valve, and switched from the factory "120" jet to a 145)... The bike really moves now. I really notice a BIG change in the acceleration. As the folks at Nissan would say- "ZOOM ZOOM"! I also added some green LED lights underneath the gas tank. I'll have to take some additional photos tonight. - Dave Bo

04-26-2009, 01:00 PM	#1
David Bo Member Join Date: Apr 2009 Location: Northbridge, MA Posts: 96	UPDATE - New K&N Filter, Emgo Muffler, and Carburator Mods OK, I'm finally finished... My new filter and muffler came in last week The air filter was very easy to replace. The muffler was a little bit difficult but only because I was fussy about positioning it. I ended up cutting the muffler's mounting bracket a bit to position the exhaust pipe as close to the bike as possible. I bought the extra long reverse cone muffler just like the one Blackbird put on Raven. It sounds SWEET! I also did all three carburator mods (idle screw adjustment, added washers to the needle valve, and switched from the factory "120" jet to a 145)... The bike really moves now. I really notice a BIG change in the acceleration. As the folks at Nissan would say- "ZOOM ZOOM"! I also added some green LED lights underneath the gas tank. I'll have to take some additional photos tonight. - Dave Bo Login or Register to Remove Ads
	0