JT Sprockets DIscontinued 16 Tooth Sprocket

Badbob · 08-29-2007, 08:18 PM

I was trying to get a set of sprockets and a new chain all form the same place so I would not have to pay shipping costs three times. I settled on Lake Cycle (www.lakecycle.com) and placed my order.

After four days I had not heard any thing a from them so I sent an email to customer service. A few hours later I received a call from Julie at Lake Cycle. She told me that JT Sprockets had discontinued the 16 tooth front sprocket for the GZ250. THe cheap ones are gone so if you know where to get one of these and your considering buying one you had better do it now. Thats the bad news.

The good news is the Sprocket Specialists still has them. Unfortunately it costs me $30 more. I bought front and rear sprockets and a chain.

Stretch · 08-30-2007, 03:47 PM

Thanks for letting us know BadBob. I just called my dealer and asked them to check it out and convert over to the Sprocket Specialists. Sort of a foolish decision on JT's part considering that they must be facing a large set of backorders. Oh well!
-Bob

UPDATE: my Suzuki dealer's wholesalers couldn't find a 16T. I found the Sprocket Specialist's phone number on their website (www.sprocketspecialist.com) - 1-800-782-8200. They do have TWO left in stock, but they said they are getting more in next week. Their part number is: 528-16 Front Steel Sprocket (C/S)/Std/16 Teeth/For 520 Chain. Price: $21.99 + $6.26 S&H. They are currently out of chains (BadBob must have gotten the last one!). They don't stock the rear sprockets, but they cut them to order when you ask for one. The part number on the rear sprocket is #461 and the cost is $52.99 plus shipping.

I hope this helped. Thanks for the head's up BadBob!
-Bob

Quimrider · 08-31-2007, 01:14 PM

They may not be discontinued. Both my local dealer and cyclepages.com tell me they are supposed to get more in sometime in mid October.

Badbob · 09-01-2007, 11:20 AM

Discontinued doesn't mean there are not any in the supply chain. Ten years from now someone some where might still have one. It's just harder to find them.

CANDY · 09-05-2007, 01:09 PM

i just got my sprocket in the mail and put it on last nite. i found it at bikebandit.com part #5270576-001 for $11.99
it took 4 days to get it in the mail.

Water Warrior 2 · 09-05-2007, 04:25 PM

Also check out SprocketCenter.Com . Never dealt with them but they seem to have a lot of possibilities.

Jaime · 09-07-2007, 01:23 PM

I've bought the last sprocket in the only official JT distributor in Spain... :blush:

I'll install it soon. I hope they'll build a similar one at time for replacement.

14€ ~ 19$

Quimrider · 09-08-2007, 02:27 PM

I think I got the last one from bikebandit. I ordered 2 since they are so damn hard to find and they shipped one and the second is listed as back ordered.

Jaime · 09-08-2007, 06:36 PM

Hey, guys! I don't know if you already have it, but I've found the Suzuki OEM part number for the 16T sprocket!
It was used in the GN/DR 400 1980-1982. You may buy it at any Suzuki dealer.

Here we go... # 27511-37200 :rawk:

Badbob · 09-09-2007, 12:00 AM

Quote:

Originally Posted by Jaime

Hey, guys! I don't know if you already have it, but I've found the Suzuki OEM part number for the 16T sprocket!
It was used in the GN/DR 400 1980-1982. You may buy it at any Suzuki dealer.

Here we go... # 27511-37200 :rawk:

This also fits a Suzuki GR650.

08-29-2007, 08:18 PM	#1
Badbob Senior Member Join Date: Aug 2006 Location: Tallahassee FL Posts: 945	JT Sprockets DIscontinued 16 Tooth Sprocket I was trying to get a set of sprockets and a new chain all form the same place so I would not have to pay shipping costs three times. I settled on Lake Cycle (www.lakecycle.com) and placed my order. After four days I had not heard any thing a from them so I sent an email to customer service. A few hours later I received a call from Julie at Lake Cycle. She told me that JT Sprockets had discontinued the 16 tooth front sprocket for the GZ250. THe cheap ones are gone so if you know where to get one of these and your considering buying one you had better do it now. Thats the bad news. The good news is the Sprocket Specialists still has them. Unfortunately it costs me $30 more. I bought front and rear sprockets and a chain. __________________ My GZ250 Blog Facebook Pinterest Google+ Tumblr YouTube Lumber Jocks Login or Register to Remove Ads
	0

08-30-2007, 03:47 PM	#2
Stretch Member Join Date: Jul 2007 Location: Chula Vista, CA Posts: 52	Ouch... Thanks for letting us know BadBob. I just called my dealer and asked them to check it out and convert over to the Sprocket Specialists. Sort of a foolish decision on JT's part considering that they must be facing a large set of backorders. Oh well! -Bob UPDATE: my Suzuki dealer's wholesalers couldn't find a 16T. I found the Sprocket Specialist's phone number on their website (www.sprocketspecialist.com) - 1-800-782-8200. They do have TWO left in stock, but they said they are getting more in next week. Their part number is: 528-16 Front Steel Sprocket (C/S)/Std/16 Teeth/For 520 Chain. Price: $21.99 + $6.26 S&H. They are currently out of chains (BadBob must have gotten the last one!). They don't stock the rear sprockets, but they cut them to order when you ask for one. The part number on the rear sprocket is #461 and the cost is $52.99 plus shipping. I hope this helped. Thanks for the head's up BadBob! -Bob __________________ -Bob Stretch Some of us serve only to be bad examples for others...
	0

08-31-2007, 01:14 PM	#3
Quimrider Senior Member Join Date: Jun 2007 Location: Toledo, OH Posts: 198	They may not be discontinued. Both my local dealer and cyclepages.com tell me they are supposed to get more in sometime in mid October. Login or Register to Remove Ads
	0

09-07-2007, 01:23 PM	#7
Jaime Senior Member Join Date: Jul 2007 Location: Spain Posts: 102	I've bought the last sprocket in the only official JT distributor in Spain... :blush: I'll install it soon. I hope they'll build a similar one at time for replacement. 14€ ~ 19$ __________________ Trying my best in English
	0

09-08-2007, 06:36 PM	#9
Jaime Senior Member Join Date: Jul 2007 Location: Spain Posts: 102	VERY IMPORTANT! Hey, guys! I don't know if you already have it, but I've found the Suzuki OEM part number for the 16T sprocket! It was used in the GN/DR 400 1980-1982. You may buy it at any Suzuki dealer. Here we go... # 27511-37200 :rawk: __________________ Trying my best in English
	0

09-01-2007, 11:20 AM	#4
Badbob Senior Member Join Date: Aug 2006 Location: Tallahassee FL Posts: 945	Discontinued doesn't mean there are not any in the supply chain. Ten years from now someone some where might still have one. It's just harder to find them. __________________ My GZ250 Blog Facebook Pinterest Google+ Tumblr YouTube Lumber Jocks
	0

09-05-2007, 01:09 PM	#5
CANDY Member Join Date: Aug 2007 Location: wetumpka, alabama Posts: 73	16T SPROCKET i just got my sprocket in the mail and put it on last nite. i found it at bikebandit.com part #5270576-001 for $11.99 it took 4 days to get it in the mail. __________________ IF YOU'RE NOT LIVING ON THE EDGE, YOUR TAKING UP TOO MUCH SPACE. Login or Register to Remove Ads
	0

09-05-2007, 04:25 PM	#6
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Also check out SprocketCenter.Com . Never dealt with them but they seem to have a lot of possibilities.
	0

09-08-2007, 02:27 PM	#8
Quimrider Senior Member Join Date: Jun 2007 Location: Toledo, OH Posts: 198	I think I got the last one from bikebandit. I ordered 2 since they are so damn hard to find and they shipped one and the second is listed as back ordered.
	0