Almost there....

adrianinflorida · 03-12-2009, 02:22 PM

New shocks, handlebars, grips, lots of polishing, just about to where I'm happy with the results. Still need to do something with the header rust and polish the aluminum side covers on the engine and the brake line is due to be replaced, going to get a stainless line about 4 inches longer than stock so that I can lay the bars back a bit more to the rear without pulling on the brake line at all.

Water Warrior 2 · 03-12-2009, 02:29 PM

Looking good.

music man · 03-12-2009, 03:59 PM

Are those handlebars stock?

adrianinflorida · 03-12-2009, 06:56 PM

Quote:

Originally Posted by music man

Are those handlebars stock?

No, they are these:
http://cgi.ebay.com/ebaymotors/Chrome-M ... QQtcZphoto

they're a bit taller and have a bit more sweepback than the stock bars.

music man · 03-12-2009, 09:48 PM

Next question, because I have thought seriously about those exact styled handlebars, is the reason why they are pushed so far forward because your lines aren't long enough, or because you like them like that.

Water Warrior 2 · 03-13-2009, 12:32 AM

MM, please read the whole first post not just look at the pics. :poke2: Sheesh.

patrick_777 · 03-13-2009, 02:44 AM

I was going to say something like that but I was trying to restrain...

adrianinflorida · 03-13-2009, 08:30 AM

Quote:

Originally Posted by music man

Next question, because I have thought seriously about those exact styled handlebars, is the reason why they are pushed so far forward because your lines aren't long enough, or because you like them like that.

A little bit of both, acutally. I'm only planning on pulling them back a few inches when I replace the lines, just enough to level out the grips. They were a bit different from what I was expecting, I didn't like them at first, but have really found them to be more comfortable, for me, at least.

music man · 03-13-2009, 08:34 AM

Quote:

Originally Posted by Water Warrior

MM, please read the whole first post not just look at the pics. :poke2: Sheesh.

:oops: :bong: :itsokay:

mr. softie · 03-13-2009, 09:35 PM

adrianinflorida, Your bike is looking good! Try Flitz polish for the headers and other chrome.

03-12-2009, 02:22 PM	#1
adrianinflorida Senior Member Join Date: Feb 2009 Location: Indialantic, Florida Posts: 325	Almost there.... New shocks, handlebars, grips, lots of polishing, just about to where I'm happy with the results. Still need to do something with the header rust and polish the aluminum side covers on the engine and the brake line is due to be replaced, going to get a stainless line about 4 inches longer than stock so that I can lay the bars back a bit more to the rear without pulling on the brake line at all. Login or Register to Remove Ads
	0

03-12-2009, 02:29 PM	#2
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Almost there.... Looking good.
	0

03-12-2009, 03:59 PM	#3
music man Senior Member Join Date: Jun 2008 Location: Hot Springs Arkansas Posts: 1,127	Re: Almost there.... Are those handlebars stock? __________________ "Tell me what kind of wreck you're going to have and I'll tell you what type of helmet you need." [Author Unknown] Login or Register to Remove Ads
	0

03-12-2009, 09:48 PM	#5
music man Senior Member Join Date: Jun 2008 Location: Hot Springs Arkansas Posts: 1,127	Re: Almost there.... Next question, because I have thought seriously about those exact styled handlebars, is the reason why they are pushed so far forward because your lines aren't long enough, or because you like them like that. __________________ "Tell me what kind of wreck you're going to have and I'll tell you what type of helmet you need." [Author Unknown] Login or Register to Remove Ads
	0

03-13-2009, 12:32 AM	#6
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Almost there.... MM, please read the whole first post not just look at the pics. :poke2: Sheesh.
	0

03-13-2009, 02:44 AM	#7
patrick_777 Senior Member Join Date: May 2008 Location: Tulsa, OK Posts: 1,763	Re: Almost there.... I was going to say something like that but I was trying to restrain... __________________ ]I am hiding in Honduras. I am a desperate man. Send lawyers, guns and money. The shit has hit the fan.
	0

03-13-2009, 09:35 PM	#10
mr. softie Senior Member Join Date: Jun 2008 Location: Bucks Co. PA Posts: 361	Re: Almost there.... adrianinflorida, Your bike is looking good! Try Flitz polish for the headers and other chrome. __________________ The real money in a gold rush is in supplying liqueur and women to the miners.... May the wind always be at your back and the sun overhead as you make your way down the ever winding, smoothly paved, traffic free road!
	0