tubes

infamy · 03-04-2010, 07:32 PM

I had a hell of a time finding a tube for this bike. I ended up drilling the rim out to fit a bigger valve. I have had no problems. Have any of you had to do this?

blaine · 03-04-2010, 10:43 PM

I have never had any trouble getting tubes.The dealer always had them in stock.

patrick_777 · 03-04-2010, 11:38 PM

BikeBandit and others also have them...and cheap too.

Water Warrior 2 · 03-05-2010, 01:59 AM

I would have thought there would be industry standards all manufacturers adhere to. Where is the tube from ??

infamy · 03-05-2010, 06:25 PM

My bikes original tube had a steel center valve on it. I couldn't find a tube with a center steel valve in a 15 anywhere. I found plenty of rubber valve tubes in a 15 size, so I drilled my rim out to fit a rubber valve that was a 16th bigger.

Water Warrior 2 · 03-05-2010, 11:12 PM

Ah, now I understand.

Easy Rider · 03-06-2010, 11:57 AM

Quote:

Originally Posted by infamy

I found plenty of rubber valve tubes in a 15 size, so I drilled my rim out to fit a rubber valve that was a 16th bigger.

I hope that doesn't turn out to be a mistake in the long run.
The steel stem was held in with a threaded ring (nut), right ??
Not having that on the rubber one, it might be a tad bigger on purpose ......so that it fits REAL tight......without drilling. Maybe ???

infamy · 03-06-2010, 06:09 PM

Good point Easy Rider! I will let you guys know if it was a mistake.

Sarris · 03-06-2010, 07:13 PM

I'm afraid Easy is right. I'm fairly sure that similar to a tubeless tire valve, a rubber valve stem is supposed to pull through the hole "snapping" into place.

You'll find out soon enough if you screwed up when you have to pull your first panic stop and the tube shifts causing the rim to cut off the valve. I'm also assuming you didn't file off the sharp edges or remove the burrs from the newly re-drilled hole, which may exacerbate the issue.

Tubed tires don't seat on the rim with the same tenacity as a tubeless tire. So in a panic stop (particularly on small light bikes), the tire and tube could rotate independently from the rim. That's the reason that the valve is a steel and screwed into place.

I would suggest an immediate $10 (or less) replacement tube with a steel valve, but hey, it's your ass not mine.

:skull: :skull: :skull: :skull:

Easy Rider · 03-06-2010, 08:27 PM

Quote:

Originally Posted by Sarris

I would suggest an immediate $10 (or less) replacement tube with a steel valve, but hey, it's your ass not mine.

Ahem.......
If he could have FOUND one, we wouldn't BE here in the first place. :roll:

I believe that little tid bit of information was in the first post he made. :cool:

AND which is more likely to cause an immediate problem......if the tube moves and the valve stem doesn't......or if the tube moves and the stem moves with it ???

I think that the steel tube with the "locking ring" was there in the first place because of the LONG nature of the 90 degree stem. I believe that a force MUCH greater than a tire skidding on the pavement is necessary to break the bead force of a tire and rim......if the tire is still inflated, that is.

03-04-2010, 07:32 PM	#1
infamy Junior Member Join Date: Mar 2010 Location: Austin Posts: 5	tubes I had a hell of a time finding a tube for this bike. I ended up drilling the rim out to fit a bigger valve. I have had no problems. Have any of you had to do this? Login or Register to Remove Ads
	0

03-04-2010, 10:43 PM	#2
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	Re: tubes I have never had any trouble getting tubes.The dealer always had them in stock. __________________ If at first you do succeed, try not to look surprised.
	0

03-04-2010, 11:38 PM	#3
patrick_777 Senior Member Join Date: May 2008 Location: Tulsa, OK Posts: 1,763	Re: tubes BikeBandit and others also have them...and cheap too. __________________ ]I am hiding in Honduras. I am a desperate man. Send lawyers, guns and money. The shit has hit the fan. Login or Register to Remove Ads
	0

03-05-2010, 01:59 AM	#4
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: tubes I would have thought there would be industry standards all manufacturers adhere to. Where is the tube from ??
	0

03-05-2010, 06:25 PM	#5
infamy Junior Member Join Date: Mar 2010 Location: Austin Posts: 5	Re: tubes My bikes original tube had a steel center valve on it. I couldn't find a tube with a center steel valve in a 15 anywhere. I found plenty of rubber valve tubes in a 15 size, so I drilled my rim out to fit a rubber valve that was a 16th bigger. Login or Register to Remove Ads
	0

03-05-2010, 11:12 PM	#6
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: tubes Ah, now I understand.
	0

03-06-2010, 06:09 PM	#8
infamy Junior Member Join Date: Mar 2010 Location: Austin Posts: 5	Re: tubes Good point Easy Rider! I will let you guys know if it was a mistake.
	0

03-06-2010, 07:13 PM	#9
Sarris Senior Member Join Date: May 2007 Location: New Port Richey, Florida USA Posts: 1,348	Re: tubes I'm afraid Easy is right. I'm fairly sure that similar to a tubeless tire valve, a rubber valve stem is supposed to pull through the hole "snapping" into place. You'll find out soon enough if you screwed up when you have to pull your first panic stop and the tube shifts causing the rim to cut off the valve. I'm also assuming you didn't file off the sharp edges or remove the burrs from the newly re-drilled hole, which may exacerbate the issue. Tubed tires don't seat on the rim with the same tenacity as a tubeless tire. So in a panic stop (particularly on small light bikes), the tire and tube could rotate independently from the rim. That's the reason that the valve is a steel and screwed into place. I would suggest an immediate $10 (or less) replacement tube with a steel valve, but hey, it's your ass not mine. :skull: :skull: :skull: :skull: __________________ Prudent riders live longer than moron riders.
	0