Brake Fluid Reservoir

lynsktee · 08-10-2014, 04:05 PM

I just got a new to me 2008 GZ250, I went out to look at the brake fluid level and it looked like there was a white coating over the window so I scratched it. It turned out that the sun had changed the window to white and I ended up creating a whole which the brake fluid leaked out. Can you buy a new cap for the window? Or where can I buy a new reservoir if needed?
What do I need to do?
Thanks

mainlinecoffee · 08-10-2014, 05:03 PM

Any hydraulic lever can be used as long as it is rh 7/8. I doubt you can get a window but you can get an entire reservoir that screws on top of the lever assy.

Water Warrior 2 · 08-10-2014, 07:27 PM

ebay is the answer.

**jonathan180iq** · 08-11-2014, 08:43 AM

You can replace, or you can do what I did...

As long as you have about 24 hours where you will not use the bike, then this is simple.

Go to anywhere that sells it, and purchase a tube of QuickSteel. It's a hardening putty that's impermeable after it cures. You'll also need a dime.

Use the dime in place of the sight glass and created a bead and a seam with the putty.

If you can mold play-doh, then you can do this.

Allow the seated dime and QuickSteel to cure for a whole day, then pour in your favorite brake fluid, bleed the brakes while you are at it, and you're golden!

I'm sure someone is going to mention that brake fluid eats everything and certainly it will deteriorate the putty over time... It doesn't. I had it on there for about a year, and that was 2 years ago. The bike's new owner got ahold of me not a week ago and I asked about the dime. It's all still holding and functioning perfectly.

08-10-2014, 04:05 PM	#1
lynsktee Junior Member Join Date: Aug 2014 Posts: 2	Brake Fluid Reservoir I just got a new to me 2008 GZ250, I went out to look at the brake fluid level and it looked like there was a white coating over the window so I scratched it. It turned out that the sun had changed the window to white and I ended up creating a whole which the brake fluid leaked out. Can you buy a new cap for the window? Or where can I buy a new reservoir if needed? What do I need to do? Thanks Login or Register to Remove Ads
	0

08-10-2014, 07:27 PM	#3
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	ebay is the answer. Login or Register to Remove Ads
	0

08-10-2014, 05:03 PM	#2
mainlinecoffee Senior Member Join Date: Oct 2013 Location: lexington ky Posts: 223	Any hydraulic lever can be used as long as it is rh 7/8. I doubt you can get a window but you can get an entire reservoir that screws on top of the lever assy.
	0

08-11-2014, 08:43 AM	#4
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	You can replace, or you can do what I did... As long as you have about 24 hours where you will not use the bike, then this is simple. Go to anywhere that sells it, and purchase a tube of QuickSteel. It's a hardening putty that's impermeable after it cures. You'll also need a dime. Use the dime in place of the sight glass and created a bead and a seam with the putty. If you can mold play-doh, then you can do this. Allow the seated dime and QuickSteel to cure for a whole day, then pour in your favorite brake fluid, bleed the brakes while you are at it, and you're golden! I'm sure someone is going to mention that brake fluid eats everything and certainly it will deteriorate the putty over time... It doesn't. I had it on there for about a year, and that was 2 years ago. The bike's new owner got ahold of me not a week ago and I asked about the dime. It's all still holding and functioning perfectly.
	0