hotwire. key wont work

iMoon1221 · 02-08-2014, 08:50 PM

I dont know what happened but my key won't work. When i put it in the ignition it goes in way to smooth (like its not touching anything) but doesnt seem to go in all the way. My car broke down so its my only mode of transportation. i need a quick fix. Could hotwiring it mess it up? If,not what colors are the wires to connect

raul10141964 · 02-08-2014, 09:47 PM

Before hot wire put some lubricant inside the lack

iMoon1221 · 02-08-2014, 10:46 PM

Inside the lack? And what would be a good lubricant?
Thanks for the response!

Water Warrior 2 · 02-08-2014, 11:55 PM

Try some contact cleaner. Spray it in the ignition key hole.

iMoon1221 · 02-09-2014, 10:15 AM

YOU ARE MY HERO!!!! It worked. Such a simple solution thank you so much

Water Warrior 2 · 02-09-2014, 01:51 PM

Always look for a simple solution. If you go looking for trouble it will find you.

raul10141964 · 02-09-2014, 04:50 PM

my local locksmith put some special lubricant on my an never have the problem again

02-08-2014, 08:50 PM	#1
iMoon1221 Member Join Date: Aug 2013 Location: Tennessee Posts: 83	hotwire. key wont work I dont know what happened but my key won't work. When i put it in the ignition it goes in way to smooth (like its not touching anything) but doesnt seem to go in all the way. My car broke down so its my only mode of transportation. i need a quick fix. Could hotwiring it mess it up? If,not what colors are the wires to connect Login or Register to Remove Ads
	0

02-08-2014, 10:46 PM	#3
iMoon1221 Member Join Date: Aug 2013 Location: Tennessee Posts: 83	Inside the lack? And what would be a good lubricant? Thanks for the response! Login or Register to Remove Ads
	0

02-09-2014, 10:15 AM	#5
iMoon1221 Member Join Date: Aug 2013 Location: Tennessee Posts: 83	YOU ARE MY HERO!!!! It worked. Such a simple solution thank you so much Login or Register to Remove Ads
	0

02-08-2014, 09:47 PM	#2
raul10141964 Senior Member Join Date: Apr 2012 Location: Elkhart, Indiana Posts: 369	Before hot wire put some lubricant inside the lack
	0

02-08-2014, 11:55 PM	#4
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Try some contact cleaner. Spray it in the ignition key hole.
	0

02-09-2014, 01:51 PM	#6
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Always look for a simple solution. If you go looking for trouble it will find you.
	0

02-09-2014, 04:50 PM	#7
raul10141964 Senior Member Join Date: Apr 2012 Location: Elkhart, Indiana Posts: 369	my local locksmith put some special lubricant on my an never have the problem again
	0