No vacuum above 2-nd gear.

sedifus · 06-10-2018, 07:59 PM

gz250 2000,

Got a leak, engine was shutting off.
Replaced petcock, carb hoses, rebuilt carb, both vacuum and main membrane replaced, pilot screw replaced with a new one, the pin was broken.

Now works fine in any gear as long as petcock is on prime.
As soon as it switches to vacuum ( reserve/on) it starts sputtering, but only above 2-nd gear.

Checked vacuum in neutral, it seem to work fine persisting suction. Don't know if it looses suction while in gears but no problem noticed in 1-st and 2-nd gear either.

Is there something else I could check before getting a new carb?

06-10-2018, 07:59 PM	#1
sedifus Junior Member Join Date: Jun 2014 Posts: 7	No vacuum above 2-nd gear. gz250 2000, Got a leak, engine was shutting off. Replaced petcock, carb hoses, rebuilt carb, both vacuum and main membrane replaced, pilot screw replaced with a new one, the pin was broken. Now works fine in any gear as long as petcock is on prime. As soon as it switches to vacuum ( reserve/on) it starts sputtering, but only above 2-nd gear. Checked vacuum in neutral, it seem to work fine persisting suction. Don't know if it looses suction while in gears but no problem noticed in 1-st and 2-nd gear either. Is there something else I could check before getting a new carb? Login or Register to Remove Ads
	0