10-07-2007, 09:59 PM
|
#11 |
|
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
Badbob, the trunk mount was quite easy. Remove the pillion seat, retained the front bracket for the pillion and used a piece of flat plate to mount the trunk mounting plate on. Had a metal shop cut it to size and bend the rear of the plate( approx 1 inch) at an angle to match the mounting bolt of the rear fender. Check bike mods for March 22 for a pic of the trunk and mounting plate.
Login or Register to Remove Ads |
|
|
|
|
Threaded Mode