Handle Bar Balancer question

Slashback115 · 07-21-2011, 11:35 PM

I have taken it apart, since its basically falling off, and did some looking at the manual. Basically i need part #09159-06024 (Nut) and # 56272-44500 (Expander).

I have found them online for only 4 bux, but with 20 dollar shipping. is there a generic nut and expander i can use? if so, what size do i need? (They are missing, so i cant compare at an auto store)

Thanks!!!!

spicciani · 07-22-2011, 12:17 AM

try this http://www.bikebandit.com/2003-suzuki-g ... #sch506639

Slashback115 · 07-22-2011, 12:27 AM

thanks for the reply, but that just gives the part number and gerneral info.. I need the size of the nut/expander

**jonathan180iq** · 07-22-2011, 08:19 AM

Most all expanders are the same. Just make sure you're buying one for a 7/8" bar.

Some bar ends come with their own screws/bolts. Just read the item description to make sure.

Slashback115 · 07-22-2011, 10:18 AM

ok thanks i hope autozone will have said item. I guess ill just bring the screw to see what nut fits.

Slashback115 · 07-22-2011, 07:19 PM

I solved the problem, but not the way i wanted too.

The nut is order only. Couldn't find one anywhere. And the Extender was found at a local hardware store.

I went with a 3rd Party kit, which replaced the entire package. Install took 2 min. and cost 11.99

Thanks for the Help!

alantf · 07-23-2011, 06:10 AM

Quote:

Originally Posted by Slashback115

The nut is order only.

Can't understand why. A nut is a nut is a nut. Surely that's all there is to it? :??:

blaine · 07-23-2011, 07:12 AM

Quote:

Originally Posted by alantf

Quote:

Originally Posted by Slashback115

The nut is order only.

Can't understand why. A nut is a nut is a nut. Surely that's all there is to it? :??:

IIRC the nut has a large shoulder area,much larger than a standard nut.But I don't see why a regular nut with the proper thread would not work.

:2tup:

07-21-2011, 11:35 PM	#1
Slashback115 Junior Member Join Date: Jun 2011 Location: Newport News, VA Posts: 14	Handle Bar Balancer question I have taken it apart, since its basically falling off, and did some looking at the manual. Basically i need part #09159-06024 (Nut) and # 56272-44500 (Expander). I have found them online for only 4 bux, but with 20 dollar shipping. is there a generic nut and expander i can use? if so, what size do i need? (They are missing, so i cant compare at an auto store) Thanks!!!! Login or Register to Remove Ads
	0

07-22-2011, 12:17 AM	#2
spicciani Member Join Date: Dec 2010 Location: Mobile, Alabama Posts: 70	Re: Handle Bar Balancer question try this http://www.bikebandit.com/2003-suzuki-g ... #sch506639
	0

07-22-2011, 12:27 AM	#3
Slashback115 Junior Member Join Date: Jun 2011 Location: Newport News, VA Posts: 14	Re: Handle Bar Balancer question thanks for the reply, but that just gives the part number and gerneral info.. I need the size of the nut/expander Login or Register to Remove Ads
	0

07-22-2011, 08:19 AM	#4
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Re: Handle Bar Balancer question Most all expanders are the same. Just make sure you're buying one for a 7/8" bar. Some bar ends come with their own screws/bolts. Just read the item description to make sure.
	0

07-22-2011, 10:18 AM	#5
Slashback115 Junior Member Join Date: Jun 2011 Location: Newport News, VA Posts: 14	Re: Handle Bar Balancer question ok thanks i hope autozone will have said item. I guess ill just bring the screw to see what nut fits. Login or Register to Remove Ads
	0

07-22-2011, 07:19 PM	#6
Slashback115 Junior Member Join Date: Jun 2011 Location: Newport News, VA Posts: 14	Re: Handle Bar Balancer question I solved the problem, but not the way i wanted too. The nut is order only. Couldn't find one anywhere. And the Extender was found at a local hardware store. I went with a 3rd Party kit, which replaced the entire package. Install took 2 min. and cost 11.99 Thanks for the Help!
	0