Go Back   GZ 250 Forums > GZ250-Specific > Troubleshooting

Reply
 
Thread Tools Display Modes
Old 10-21-2017, 10:55 AM   #11
Roadking
Member
 
Join Date: Apr 2017
Location: South of Atlanta
Posts: 50
well I jumpered the side stand switch at the connector so the circuit should see it as closed/up since I cant get any continuity thru the switch. I'm just trying to eliminate things one at a time to get spark.
I hooked up a peak voltage adapter/reader to my multi tester and at the cdi plug +to green and - to blue I'm reading 3.34v during cranking.
Getting the same reading at the pickup coil 2 wire plug between green to blue wire as well.
the confusing part is the manual says 5v but not that it should read less or more.

more resistance measuring is needed between the coil primary and secondary however I'm begining to think the cdi went south. I dont have another one to "try" just to see.

I can tell you the 3 wires coming from the stator windings are not showing a ground. I just dont know if they are not producing enough voltage to generate the correct spark or a spark at all. Further troubleshooting/research on the voltage reading I'm getting is what I need. The PDF manual I printed from seems to point in the direction of, that if the reading is less than 5v to replace the generator.



Login or Register to Remove Ads
Roadking is offline  
Reply With Quote
Old 10-23-2017, 03:54 PM   #12
derbydave
Senior Member
 
derbydave's Avatar
 
Join Date: Jan 2017
Location: KS
Posts: 103
You might be right on the CDI box. Unfortunately there does not seem to be much information in the manual regarding testing it's operation.
__________________
2003 Suzuki GZ250 (Sold)
1986 Suzuki Cavalcade LXE
1986 Suzuki Intruder VS700
derbydave is offline  
Reply With Quote
Old 10-26-2017, 07:28 AM   #13
Roadking
Member
 
Join Date: Apr 2017
Location: South of Atlanta
Posts: 50
where is a good source for a cdi purchase? The dealer wants $350 or so. Is there a website that sells OEM for less than that?



Login or Register to Remove Ads
Roadking is offline  
Reply With Quote
Old 10-26-2017, 11:10 AM   #14
derbydave
Senior Member
 
derbydave's Avatar
 
Join Date: Jan 2017
Location: KS
Posts: 103
ebay
__________________
2003 Suzuki GZ250 (Sold)
1986 Suzuki Cavalcade LXE
1986 Suzuki Intruder VS700
derbydave is offline  
Reply With Quote
Old 11-01-2017, 08:44 AM   #15
Roadking
Member
 
Join Date: Apr 2017
Location: South of Atlanta
Posts: 50
really? Ebay for a new oem?



Login or Register to Remove Ads
Roadking is offline  
Reply With Quote
Old 11-01-2017, 08:55 AM   #16
derbydave
Senior Member
 
derbydave's Avatar
 
Join Date: Jan 2017
Location: KS
Posts: 103
No, used. I don't know if I would be buying a new part unless I was 100% certain it would fix the problem. For new stuff I use www.suzukipartshouse.com
__________________
2003 Suzuki GZ250 (Sold)
1986 Suzuki Cavalcade LXE
1986 Suzuki Intruder VS700
derbydave is offline  
Reply With Quote
Old 12-06-2017, 01:28 PM   #17
Roadking
Member
 
Join Date: Apr 2017
Location: South of Atlanta
Posts: 50
Ok new information from the P.O. He says He tried a known good cdi from a second Suzuki 250 he bought but it made no difference. Still no spark. Going to try a new spark plug before going further. Also it looks like if the side stand switch is closed or up I should have continuity between E and D


C to A or B to A should show something as well. As long as you go thru the diode in the correct direction +c to -A or +b to -a does that sound/look correct?

Last edited by Roadking; 12-06-2017 at 01:31 PM.
Roadking is offline  
Reply With Quote
Old 12-07-2017, 04:35 AM   #18
alantf
Senior Member
 
alantf's Avatar
 
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,715
Try a good blast of aerosol contact cleaner on the side stand switch, and work the stand a few times. See if that makes any difference.
__________________
By birth an Englishman, by the grace of God a Yorkshireman.
alantf is offline  
Reply With Quote
Old 12-08-2017, 09:24 AM   #19
Roadking
Member
 
Join Date: Apr 2017
Location: South of Atlanta
Posts: 50
I got my local stealership to match suzukipartswarehouse and came down off $97 to 65 for a new sidestand switch. I ordered that and a new NGK DR9EA spark plug. wont be in until next Wednesday 12/13/17. So, we shall see. If the switch makes no difference I'm going to try the relay next.
Roadking is offline  
Reply With Quote
Old 12-18-2017, 10:08 AM   #20
Roadking
Member
 
Join Date: Apr 2017
Location: South of Atlanta
Posts: 50
finally got the new switch and spark plug now just need free time to install them.
MuHAHAHAHAHAHAHAHAHA! never happen right? Free Time what Am I thinking?
Roadking is offline  
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:31 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.