GZ 250 Forums

GZ 250 Forums (http://www.gz250bike.com/forum/index.php)
-   General Maintenance (http://www.gz250bike.com/forum/forumdisplay.php?f=22)
-   -   click when let out the clutch at low throttle (http://www.gz250bike.com/forum/showthread.php?t=2243)

5th_bike 04-18-2009 11:29 PM

Re: click when let out the clutch at low throttle
 
Quote:

Originally Posted by dannylightning
quick question about the rear axle nuts after tensioning the chain, it says you want about 50 lbs of torque [...] does that sound about right

Yes, the book says 78 Nm, that's about 56 lbs.

Water Warrior 2 04-19-2009 01:53 AM

Re: click when let out the clutch at low throttle
 
A half inch drive should be more than adequate with a strong arm or 2.

dannylightning 04-30-2009 05:55 PM

Re: click when let out the clutch at low throttle
 
i guess i should mention, i found out what the problem was. sometimes i was barley tapping the gear shifter up and it was not quite changing gears. i was paying attention to what i was doing and did not hear it click when i shifted but when i let the clutch out and that clicked it in to gear.

i started hitting the gear shifter just a little harder to where i would hear it click and it has not happened since.


All times are GMT -4. The time now is 03:50 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.