![]() |
2 problems dont know if its normal
On my old 600gsxr On a cold night or a summer day it would start right away, So just out of curiosity Is it normal for my Gz250 on a cold morning to take a while to start i usually have to put the choke which i know that's normal but i have to press the power button 5-7 times is that normal? Another thing is when i'm riding once the bike is warm. Is it normal for the bike to lose power while i'm on high revs? it usually does it 1st gear 2nd gear and sometimes 3rd gear once i get to 4th and 5th i dont really notice it. Just curious Previous owner had the bike sitting for 3 months. I once left my gsxr sit for 6 months and when i started the bike i didnt notice anything different. My friend advised me to use some carb cleaner i'm probably going to do that tomorrow.
|
Re: 2 problems dont know if its normal
Yup...........Carb cleaner is your best bet. For some reason, Suzuki put the crappest of crap carbs on the Gz. Once you get it running properly, you'll find that you'll need to add carb cleaner to the tank every few fill ups, to keep the carb at peak performance. :2tup:
|
Re: 2 problems dont know if its normal
I concur.
Just add carb cleaner and see where that leaves you. It's a common issue. Small passages and just a little bit of varnish or other gas tank trash can lead to some head-banging issues. If the cold starting problem persists or gets worse, then you need to look into a valve adjustment. |
Re: 2 problems dont know if its normal
Quote:
|
Re: 2 problems dont know if its normal
Quote:
|
Re: 2 problems dont know if its normal
Quote:
|
Re: 2 problems dont know if its normal
Is there a specific carb cleaner you guys recommend. I may have to take her to the shop.
|
Re: 2 problems dont know if its normal
Quote:
|
Re: 2 problems dont know if its normal
Berryman's is 1/3 the price of SeaFoam unless they are running a special and you can get SeaFoam 2 for 1 sometimes.
|
Re: 2 problems dont know if its normal
How do you use the SeaFoam and should you use it even if you're not having any problems for preventative maintenance?
|
All times are GMT -4. The time now is 06:36 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.