![]() |
Silly question regarding oil
I didn't see where this has been addressed in the past so I figure il ask. I was having some overheating issues when it got to about 80 out so I did a quick oil change with some automotive dyno juice. Never did the filter so today I am changing the filter and I was wondering,can I feed it 20w50 synthetic? Just to keep it cool? It runs pretty hot even on the highway going 55 constant.
|
ticker oil don't solve overheating problems only put more stress on the oil pump increasing the fuel consumption an lower the power output of the engine.
Automotive oil contain friction modifiers and will damage the clutch . I recommend rotella 15w-40, is inexpensive and certify for Japanese motorcycles. This engines run very hot because the carburetor is tun very lean to met emissions and is the main reason for damage exhaust valves |
Qasual - I actually differ a little from what Raul said assuming he meant Rotella T6. I would not use that brand even if it is Jaso approved.
|
Quote:
|
Awesome! I don't think it's lean running drag pipe two shims 140 main and 7something pilot,got the kit from sigma6 what is the normal temp? I think I will just carry a point click thermostat like people use on BBQ pits.
|
Rotella 15-40 will be a good oil for the GZ. We ran it in both the Vstrom 650 and Suzuki M-50 with good results. I was using it before the actual certification was made and had no problems. Just keep one thing in mind. If the Rotella can survive in a loaded 18 wheeler a GZ will never lack any protection. Cheap and easy to find too.
|
Another Rotella user.
I use both the T-6 and the 15w 40. |
I think re gearing would work magic,I have seen mixed reviews but I am confident that it has enough power it just revs too damn high to stay at speed.
|
avoid extended idling and install 16T sprocket
|
All times are GMT -4. The time now is 08:51 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.