Lacking Power-Part Name or Number?
 

Hello All,

My gz250 has been lacking power when going from mid to full throttle. I looked around and found cracks on the coupling between carburetor and engine intake. This is probably the problem. However, I dont know what the part name or number is. I looked on the service manual but couldn't find anything. Below is a picture of it. If you know, Please share the part name, number or a web-link.

Thank you very much!http://i32.photobucket.com/albums/d4...pshkuzaetv.jpg

-Adrian

p.s
I also found this unplugged hose. is it supposed to be like this?
http://i32.photobucket.com/albums/d4...psq6pvt2rw.jpg
http://www.gz250bike.com/forum/<a hr...pshkuzaetv.jpg

Yep...That is just a drain/over flow for the carb.......That is the "Intake boot" or manifold.
http://shop.ronayersmotorcycles.com/...003&fveh=10117

# 24 in pic......13110-13F00

Thank you very much Blaine. You were very helpful. I will definitely save that link for future reference!

It's a great site......You can cross reference part # to see what is interchangeable with different models/years.