GZ 250 Forums

GZ 250 Forums (http://www.gz250bike.com/forum/index.php)
-   Troubleshooting (http://www.gz250bike.com/forum/forumdisplay.php?f=19)
-   -   Post seizure (http://www.gz250bike.com/forum/showthread.php?t=8058)

Bpat829 03-09-2018 01:39 PM

Post seizure
 
Alright so here goes I bought a gz for 350 bucks and I knew the engine was seized. I had some luck with vehicles before and was overconfident going into this. Long story short I got it unseize or at least to the point where the Piston is moving halfway. I e when I have it in 5th gear walk it backwards with the clutch out then clutch in and hit the starter it moves the piston up into the head
but does not fully gain compression enough to attempts to turn over. I don't know if I'm being impatient and I should wait longer and continue to baby it and let it work loose or if you Pros had some thoughts.

derbydave 03-09-2018 04:01 PM

Have a look into the spark plug hole with a flashlight or Bore camera. It is possible it dropped a valve.

Bpat829 03-09-2018 06:13 PM

Not sure the Piston moves well one way I might just have to suck it up and pull it off.


All times are GMT -4. The time now is 06:00 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.