Quote:
|
Originally Posted by GEREN
there arent too many here in Melb and all the help seems to be from guys in the States (and they'll have different specs!
|
Well ......... I'm in Spain, so mine's European spec. (Apparently that's the same as Canadian spec, apart from the lighting regs) I don't know quite what spec yours'll be. The main difference with European versus American is that the European carb is set up richer (American carbs are set up weaker to comply with the emission laws) so treat any postings about carb mods with caution.
I'll e-mail my mate in Perth, sometime today, & see if he can shed any light on the Oz spec. He's been riding in Oz for a lot of years, & his job is selling diagnostic computers to garages, so I'd imagine he's well up on the specs :2tup:
EDIT :- I've e-mailed Bob, in Perth, but so far, no reply (there's a 9 hour time difference) In the meantime I've checked the service manual - you can download it from this site - & there's DEFINITELY an Aussie spec. Check any item for code E-24. The main difference is the carb, & hence the idle speed. I'll not go any further into this, because you'll learn a LOT more by reading the manual & finding what applies to the bike in general, & the Aussie bike in particular.
:2tup: