GZ 250 Forums - View Single Post

cb3 · 08-19-2010, 05:38 PM

Hey Guys. Thanks for the advice. My buddy works on airplanes and also suggested the brass brush idea. He says it works wonders. For now its clean enough to be seen on so Im ridin. Today I switched to 5w40 synthetic. Only put a few miles on it so far but seems smoother. I also put a little B-12 in the tank and turned the pilot screw in 1/2 turn. I rode about 100 miles with the screw at 2.5 turns out and it seemed ok but I cant be satisfied with ok. I adjust till its really outta whack then find the sweet spot again.(hopefully). Thank again guys!

08-19-2010, 05:38 PM	#8
cb3 Junior Member Join Date: Aug 2010 Location: North Carolina Posts: 18	Re: First Bike! Best Forum Ever! Hey Guys. Thanks for the advice. My buddy works on airplanes and also suggested the brass brush idea. He says it works wonders. For now its clean enough to be seen on so Im ridin. Today I switched to 5w40 synthetic. Only put a few miles on it so far but seems smoother. I also put a little B-12 in the tank and turned the pilot screw in 1/2 turn. I rode about 100 miles with the screw at 2.5 turns out and it seemed ok but I cant be satisfied with ok. I adjust till its really outta whack then find the sweet spot again.(hopefully). Thank again guys!
	0