Quote:
|
Originally Posted by davidsuserid
I installed a replacement master brake cylinder on the GZ last night. It wasn't a direct replacement, OEM part, but it fit the bill, or so I thought.
|
At the risk of being labeled "nasty" (or worse), I think that is a BAD idea.......with something as important as a front brake.
You probably need to disconnect the TOP of the hose first and see if you have a fluid block or if there is a mechanical problem causing the binding.
CAUTION: Be VERY careful with the brake fluid. It will EAT paint and windshields. (Don't ask me how I know!). :roll: