GZ 250 Forums - View Single Post - Anybody install "Photon Blasters" lights?

Goose51683 · 06-20-2013, 08:22 AM

Here they are,

brake and running light
http://www.autozone.com/autozone/access ... rget=shelf

Turn signals

http://www.autozone.com/autozone/access ... rget=shelf

The turn signals were a simple 2 wire to 2 wire connection

The brake light setup on the bike has 3 wires and the LED strips only have 2 wires so you have to figure out which of the 3 is your neutral, hook both LEDs up to the neutral and then use the remaining LED wire to connect to the one of the two remaining wires. 1 for brake, 1 for running.

easily done and riding in 30 mins.

06-20-2013, 08:22 AM	#7
Goose51683 Senior Member Join Date: Apr 2013 Location: Indiana Posts: 621	Re: Anybody install "Photon Blasters" lights? Here they are, brake and running light http://www.autozone.com/autozone/access ... rget=shelf Turn signals http://www.autozone.com/autozone/access ... rget=shelf The turn signals were a simple 2 wire to 2 wire connection The brake light setup on the bike has 3 wires and the LED strips only have 2 wires so you have to figure out which of the 3 is your neutral, hook both LEDs up to the neutral and then use the remaining LED wire to connect to the one of the two remaining wires. 1 for brake, 1 for running. easily done and riding in 30 mins.
	0