|
|
06-20-2013, 08:22 AM
|
#1 |
|
Senior Member
Join Date: Apr 2013
Location: Indiana
Posts: 621
|
Re: Anybody install "Photon Blasters" lights?
Here they are,
brake and running light http://www.autozone.com/autozone/access ... rget=shelf Turn signals http://www.autozone.com/autozone/access ... rget=shelf The turn signals were a simple 2 wire to 2 wire connection The brake light setup on the bike has 3 wires and the LED strips only have 2 wires so you have to figure out which of the 3 is your neutral, hook both LEDs up to the neutral and then use the remaining LED wire to connect to the one of the two remaining wires. 1 for brake, 1 for running. easily done and riding in 30 mins. Login or Register to Remove Ads |
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
