First time with GZ250

[JsRedLineRacer]

Originally Posted by blaine

Yep 2 1/2 turns from lightly seated. The muffler looks fine.Check the back of the petcock to see if the vacuum line is attached.The petcock needs vacuum to run in the "on" position.Also if that vacuum line is leaking you will never get the bike to idle or run properly.

next time ill have to double check. it was unpluged this time i could have sworn i put it back both times.

just to confirm i tighten until i felt the jet start touching the rubber and then went back 2 1/2 turns.