07-22-2010, 10:35 PM
|
#11 |
|
Senior Member
Join Date: May 2007
Location: North Carolina
Posts: 334
|
Re: Front Brake is 'crunchy'
If nothing else, it could simply the piston inside the master cylinder, you only need to open the cylinder and remove the piston. adding fresh brake fluid when replacing the brake pads is not required, the rubber in the piston is the problem. read the posts below.
viewtopic.php?f=7&t=2443 viewtopic.php?f=7&t=2413 viewtopic.php?f=7&t=2411
__________________
“God creates out of nothing. Wonderful you say. Yes, to be sure, but he does what is still more wonderful: he makes saints out of sinners.” “People understand me so poorly that they don't even understand my complaint about them not understanding me.” --- Søren Kierkegaard --- Login or Register to Remove Ads |
|
|
|
07-24-2010, 12:21 PM
|
#12 |
|
Senior Member
Join Date: Aug 2009
Location: gainesville, fl
Posts: 137
|
Re: Front Brake is 'crunchy'
Thanks everyone. I took it up to the shop and the guy changed the fluid. The screws that hold the cap on were rusty and he thinks some may have gotten into the fluid. It works a whole lot better now.
Of course, now that my bike is fixed something is wrong with my Jeep. I thought it was just a dead battery but I had a big truck jump it, no luck. Luckily, my mom's boyfriend is a mechanic and he's going to look at it for me. =) I have bad vehicle karma or something...maybe in a past life I wrecked cars all the time.
__________________
"An inconvenience is only an adventure wrongly considered; an adventure is an inconvenience rightly considered." - Gilbert Keith Chesterton (1874-1936) |
|
|
|
|
07-25-2010, 09:52 AM
|
#14 | |
|
Senior Member
Join Date: Oct 2007
Location: HoCo, Maryland
Posts: 1,349
|
Re: Front Brake is 'crunchy'
Quote:
__________________
2005 "Saturn Black", stock + tach |
|
|
|
|
 |
|
|
Linear Mode
