Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > Troubleshooting

Reply
 
Thread Tools Display Modes
Old 03-19-2011, 07:13 PM   #11
alanmcorcoran
Senior Member
 
Join Date: Jul 2008
Location: Anaheim, CA
Posts: 2,926
Cranks but dies when you pull the throttle

Mangle,

Sounds to me like you got it. Good work. Once you get a full tank of gas through it you should notice better idling, better power and better acceleration. I have not found that the carb cleaner is needed as long as you don't let the bike sit for more than a couple weeks. Glad you are out riding instead of effing with it in the garage. Once it gets settled in, locate the idle adjustment. It tends to idle best at a bit north of 1000rpm, depending on the age and condition of the bike. Only mess with it if you find it "racing" after the bike is warmed up. Keep using the choke to start it, but don't leave it on once it's warmed up. Warmup time will vary with the weather etc. but is rarely more than seven or eight minutes.
__________________
[hr:5yt6ldkq][/hr:5yt6ldkq]
http://alanmarkcorcoran.com Motorcycles, Music, Musings and Moreā€¦



Login or Register to Remove Ads
alanmcorcoran is offline  
Reply With Quote
Old 03-20-2011, 06:20 AM   #12
alantf
Senior Member
 
alantf's Avatar
 
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,715
Re: Cranks but dies when you pull the throttle

Quote:
Originally Posted by "alanmcorcoran
It tends to idle best at a bit north of 1000rpm
Suzuki recommend 1200-1400RPM, when the bike is good n' hot. You can use this as a starting point to set it to what suits you best. :2tup:
__________________
By birth an Englishman, by the grace of God a Yorkshireman.
alantf is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:38 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.