Exhaust

techdude2013 · 06-04-2011, 02:46 PM

I need a new exhaust for my bike! The whole thing. Does anybody know where I can get one?

MadCityRider · 06-04-2011, 08:12 PM

Stock or after market?

techdude2013 · 06-05-2011, 03:46 PM

Preferably stock

alantf · 06-05-2011, 05:52 PM

Quote:

Originally Posted by techdude2013

I need a new exhaust for my bike! The whole thing. Does anybody know where I can get one?

Damn...... I've got one in the garage that I'll probably never use. It's got a little scratch on it, that was done when someone reversed into the parked bike. Their insurance paid for a replacement. Problem is - there isn't a cat in hell's chance of getting it to America with any sort of a reasonable postage cost. I'm just so sorry that there's something sitting there that somebody else could use.

MadCityRider · 06-09-2011, 03:39 PM

If you decide to go with an aftermarket, I've got a good recommendation that has worked for me. No welding required but you will need a grinder/sawzall.

Rookie Rider · 07-17-2011, 12:43 AM

Whats your recommendation MCR ?

**jonathan180iq** · 07-18-2011, 08:39 AM

Buying a new factory exhaust will run you almost $600, unless you find one going on Ebay or get lucky on the forums.

Anything aftermarket will be cheaper, but it will also require some fiddling with the carb mixture.

MadCityRider · 08-04-2011, 12:33 PM

Quote:

Originally Posted by Rookie Rider

Whats your recommendation MCR ?

This is the one I used:

Jardine Rumbler Amazon Link which went on with no welding, just the supplied band clamps.

See my post here: viewtopic.php?f=2&t=4645 for looks, more info.

Rookie Rider · 08-04-2011, 03:29 PM

Cool MCR, thank you.

techdude2013 · 08-19-2011, 11:50 AM

I ended up getting a decent one (stock) for $76 :-D

06-04-2011, 02:46 PM	#1
techdude2013 Junior Member Join Date: Jun 2011 Location: Arkansas Posts: 22	Exhaust I need a new exhaust for my bike! The whole thing. Does anybody know where I can get one? Login or Register to Remove Ads
	0

06-04-2011, 08:12 PM	#2
MadCityRider Member Join Date: May 2011 Location: Madison Posts: 47	Exhaust Stock or after market? __________________ :rawk: - MCR
	0

06-05-2011, 03:46 PM	#3
techdude2013 Junior Member Join Date: Jun 2011 Location: Arkansas Posts: 22	Re: Exhaust Preferably stock Login or Register to Remove Ads
	0

06-09-2011, 03:39 PM	#5
MadCityRider Member Join Date: May 2011 Location: Madison Posts: 47	Exhaust If you decide to go with an aftermarket, I've got a good recommendation that has worked for me. No welding required but you will need a grinder/sawzall. __________________ :rawk: - MCR Login or Register to Remove Ads
	0

07-17-2011, 12:43 AM	#6
Rookie Rider Senior Member Join Date: Jun 2011 Location: Queens, NYC Posts: 1,263	Re: Exhaust Whats your recommendation MCR ?
	0

07-18-2011, 08:39 AM	#7
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Re: Exhaust Buying a new factory exhaust will run you almost $600, unless you find one going on Ebay or get lucky on the forums. Anything aftermarket will be cheaper, but it will also require some fiddling with the carb mixture.
	0

08-04-2011, 03:29 PM	#9
Rookie Rider Senior Member Join Date: Jun 2011 Location: Queens, NYC Posts: 1,263	Re: Exhaust Cool MCR, thank you.
	0

08-19-2011, 11:50 AM	#10
techdude2013 Junior Member Join Date: Jun 2011 Location: Arkansas Posts: 22	Re: Exhaust I ended up getting a decent one (stock) for $76 :-D
	0